Automotive USB Type-C Power Delivery

Key features

• Kit consisting of two boards:
  • Dual-port USB Type-C function board (AEK-USB-2TYPEC1)
  • SPC58 Chorus discovery board (SPC58EC-DISP)
• USB Power Delivery software stack pre-loaded on SPC58 discovery board
• Power board connector on USB function board
• Power Data Objects (PDO)
  • 5 V 500 mA available without external power board
  • other PDOs possible if a compatible power board (not included) is connected
• Downloadable (STSW-USB2TYPEC1) compiled flash image firmware
• Portion of connector on SPC58 Chorus discovery board available for extensions as part of the AutoDevKit development initiative
• All key ST components are qualified automotive grade
• RoHS compliant

Show more

Key features

• Both ports acting as Provider role
• Type-C attach and cable orientation detection
• High voltage protections on VBUS and CC lines
• V_BUS switch gate drivers
• V_BUS monitoring and discharge path
• A current sensing circuit for each port on VBUS line
• Power connector to interface with external power boards (not included)
• Total board dimensions: 85 mm x 81 mm
• RoHS compliant

Show more

Key features

• SPC58EC80E5 microcontroller: 32-bit Power Architecture e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144 package
• Integrated programmer and debugger
• 2 integrated ISO CAN FD transceivers
• 1 USB virtual COM Port (USB cable not included)
• 3 user push buttons and 3 user LEDs
• 2 potentiometers for ADC quick evaluation
• Reset button
• All GPIOs and signals accessible by a 4x37 connector
• Board supply: 12 V_DC (external power supply not included)
• Board size: 150 x 101 mm
• All ST components are qualified Automotive grade
• CE certified; RoHS and China RoHS compliant
• WEEE compliant (2012/19/UE RAEE II)
• Part of the AutoDevKit™ initiative

Show more

Key features

• Dual channel, independent, step-down regulators with integrated synchronous MOSFETs
• Output current up to 3 A each channel
• Channels can be paralleled to obtain a higher current supply
• Input voltage range from 6 to 14 V
• Digitally selectable fixed output voltages: 3.3 - 5 - 9 V
• PWM programmable output voltages with 20 mV steps over a range of 3.3 - 11 V
• Outputs protected against short-circuit and overcurrent
• Input and output voltage monitors (UV or OV) and power good signals
• Thermal protection thanks to the integrated thermal sensor
• Additional 3.3 V output by internal linear regulator
• Watchdog, reset, in/out synchronisation for available converters
• Board size: 84.7 mm x 81.3 mm
• Maximum component height: 10 mm
• Automotive grade qualified ST components
• Included in the AutoDevKit™ initiative
• CE certified
• RoHS and China RoHS compliant
• WEEE compliant

Show more

Key features

• SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
• Integrated programmer - debugger.
• JTAG interface (Standard 7x2 male 100mil).
• 2 ISO CAN FD port (DB9 connector).
• 1 Ethernet port.
• 1 FlexRay, 1 LIN (with transceiver).
• 1 USB virtual COM Port.
• Connectors Arduino UNO R3-compatible.
• 3 Push buttons, 3 LEDs for user purpose.
• 2 potentiometers for ADC quick evaluation.
• Reset push button.
• All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
• 12MHz crystal.
• Board Supply: 12 VDC (external power
• supply).
• Board size 150 x 101 mm.

Show more

Key features

• Package contains the firmware flash image for the AEKD-USBTYPEC1 kit, for a USB Power Delivery solution compliant with the 2.0 specification feature-set.
• SPC58EC-DISP discovery board pre-loaded with firmware (version 1.2.1).
• The firmware supports the USB Type-C dual port, provider-only role.
• The firmware defaults a PDO of 5 V 500 mA.
• Additional PDOs can be configured if a compatible power board (not supplied in the kit) is added to the AEKD-USBTYPEC1 kit.
• The software is customizable through SPC5-Studio and conforms with the ST AutoDevKit initiative.

Show more