Heating systems are becoming increasingly complex when all the possible options – seat and cabin heaters, windshield defrost, heated/cooled compartments and glow plug heaters – are considered.
Vehicle manufacturers need a scalable set of solutions to fit the different models in their range, optimized for enhancing comfort for both driver and passengers with accurate and energy-efficient temperature control systems.
We offer a set of VIPower® Zero series application-specific power ICs and SPC5 32-bit microcontrollers as well as protection devices to enable the development of scalable car heating systems.
Featured Videos
Leading-edge product portfolio for a wide range of automotive applications
Electro-thermal simulator for devices in ViPower technology
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
Part Number Description Status Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery Key features
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU Active85.75 Buy now SPC5-EV-ADIS Key features
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board Active32.12 Buy now EV-VN7007AH VN7007AH Evaluation Board ActiveVN7007AHTR 4.12 Buy now STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers Active- Part Number Supplier Download STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADISDescription:
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-Part Number Supplier Download STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
Part Number Description Status Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery Key features
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU Active85.75 Buy now SPC5-EV-ADIS Key features
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board Active32.12 Buy now STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers Active- Part Number Supplier Download STSW-SPC5EV-ADIS ST EV-VN7004CH VN7004CH Evaluation Board ActiveVN7004CHTR 4.12 Buy now STSW-SPC5EV-ADISDescription:
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-Part Number Supplier Download STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
Part Number Description Status Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery Key features
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU Active85.75 Buy now SPC5-EV-ADIS Key features
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board Active32.12 Buy now STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers Active- Part Number Supplier Download STSW-SPC5EV-ADIS ST EV-VN7003ALH VN7003ALH Evaluation Board ActiveVN7003ALHTR 4.12 Buy now STSW-SPC5EV-ADISDescription:
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-Part Number Supplier Download STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
Part Number Description Status Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery Key features
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU Active85.75 Buy now SPC5-EV-ADIS Key features
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board Active32.12 Buy now EV-VN7004CLH VN7004CLH Evaluation Board ActiveVN7004CLHTR 4.12 Buy now STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers Active- Part Number Supplier Download STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADISDescription:
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-Part Number Supplier Download STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
Part Number Description Status Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery Key features
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU Active85.75 Buy now SPC5-EV-ADIS Key features
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board Active32.12 Buy now EV-VN7007ALH VN7007ALH Evaluation Board ActiveVN7007ALHTR 4.12 Buy now STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers Active- Part Number Supplier Download STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADISDescription:
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-Part Number Supplier Download STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
Part Number Description Status Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery Key features
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU Active85.75 Buy now SPC5-EV-ADIS Key features
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board Active32.12 Buy now EV-VN7003AH VN7003AH Evaluation Board ActiveVN7003AHTR 4.12 Buy now STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers Active- Part Number Supplier Download STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADISDescription:
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-Part Number Supplier Download STSW-SPC5EV-ADIS ST
-
| Part Number | Description | |
|---|---|---|
| SPC5-UDEDEBG | PLS JTAG debugger software full license or license renewal | Quick view |
| SAMPLES-AUTOPMIC | Automotive Voltage Regulators & System Basis Chip Evaluation Tool | Quick view |
| SPC58EC-DISP | Discovery Kit for SPC58EC - C line |
Quick view
Key Features
|
| SPC582B-DIS | Discovery Kit for SPC582 B line |
Quick view
Key Features
|
| EV-VN7003AH | VN7003AH Evaluation Board | Quick view |
| EV-VN7003ALH | VN7003ALH Evaluation Board | Quick view |
| EV-VN7004CLH | VN7004CLH Evaluation Board | Quick view |
| EV-VN7007ALH | VN7007ALH Evaluation Board | Quick view |
| EV-VN7004CH | VN7004CH Evaluation Board | Quick view |
| STEVAL-OET003V1 | Evaluation board for automotive-grade ESD protection |
Quick view
Key Features
|
| EV-VN7007AH | VN7007AH Evaluation Board |
PLS JTAG debugger software full license or license renewal
Automotive Voltage Regulators & System Basis Chip Evaluation Tool
Discovery Kit for SPC58EC - C line
Discovery Kit for SPC582 B line
VN7003AH Evaluation Board