Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Governments and agencies worldwide are setting increasingly demanding and strict rules and policies to enhance the security of both drivers and passengers. This has led to the  adoption of emergency call systems – or e-call  systems – that can automatically alert first-responder services whenever an accident or car breakdown occurs.

To enable this service, vehicles will need to be equipped with a module that can sense fault conditions, provide localization, communication and a voice interface with the vehicle’s occupants.

ST’s portfolio includes automotive grade sensors, GNSS receivers and application processors to help design the modules required to enable in-car e-call systems.

00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN5092
      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications
      2.0
      521.09 KB
      PDF
      AN4872
      BlueNRG-1 and BlueNRG-2 UART bootloader protocol
      3.0
      4.7 MB
      PDF
      AN4434
      CMOS F8H automotive EEPROM cycling endurance and data retention
      4.0
      367.97 KB
      PDF
      AN2440
      Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines
      5.0
      356.4 KB
      PDF
      AN4218
      Hardware design guideline power supply and voltage measurement
      3.0
      1.4 MB
      PDF
      AN2689
      Protection of automotive electronics from electrical hazards, guidelines for design and component selection
      3.1
      797.51 KB
      PDF
      AN4869
      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade
      5.0
      1.02 MB
      PDF
      AN4392
      Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 – 2483.5 MHz band
      3.2
      539.68 KB
      PDF
      AN1471
      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?
      4.4
      72.36 KB
      PDF
      AN5092

      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications

      AN4872

      BlueNRG-1 and BlueNRG-2 UART bootloader protocol

      AN4434

      CMOS F8H automotive EEPROM cycling endurance and data retention

      AN2440

      Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines

      AN4218

      Hardware design guideline power supply and voltage measurement

      AN2689

      Protection of automotive electronics from electrical hazards, guidelines for design and component selection

      AN4869

      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade

      AN4392

      Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 – 2483.5 MHz band

      AN1471

      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?

    • Description Version Size Action
      TN1189
      A3G4250D: supplementary data related to the 3-axis digital output gyroscope
      1.0
      160.14 KB
      PDF
      TN0897
      ST SPI protocol
      2.2
      420.96 KB
      PDF
      TN0018
      Surface mounting guidelines for MEMS sensors in an LGA package
      6.0
      214.31 KB
      PDF
      TN1189

      A3G4250D: supplementary data related to the 3-axis digital output gyroscope

      TN0897

      ST SPI protocol

      TN0018

      Surface mounting guidelines for MEMS sensors in an LGA package

    • Description Version Size Action
      DT0063
      Bluetooth low-energy network: time-stamping and sample-rate-conversion
      2.0
      281.1 KB
      PDF
      DT0068
      How to replace a low-speed wired connection using a BLE link
      3.0
      291.25 KB
      PDF
      DT0063

      Bluetooth low-energy network: time-stamping and sample-rate-conversion

      DT0068

      How to replace a low-speed wired connection using a BLE link

Presentations & Training Material

    • Description Version Size Action
      Automotive Security implementation for Secure Driving 1.0
      1.52 MB
      PDF
      EEPROM Advanced Automotive products 1.0
      671.53 KB
      PDF

      Automotive Security implementation for Secure Driving

      EEPROM Advanced Automotive products

Publications and Collaterals

    • Description Version Size Action
      A698x family High-performance automotive synchronous DC-DC converters 1.0
      1.13 MB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.0
      718.85 KB
      PDF
      Automotive multichannel power management ICs 1.0
      698.09 KB
      PDF
      MEMS automotive sensors - Making our cars safer and more comfortable 1.0
      773.66 KB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      SOD128Flat Automotive-grade rectifiers 1.0
      1.42 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      TESEO-DRAW Dead Reckoning Automotive Way 1.0
      2.3 MB
      PDF
      TESEOIII: GPS/Galileo/Glonass/BeiDou/QZSS standalone receiver 1.0
      754.65 KB
      PDF

      A698x family High-performance automotive synchronous DC-DC converters

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      Automotive multichannel power management ICs

      MEMS automotive sensors - Making our cars safer and more comfortable

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      SOD128Flat Automotive-grade rectifiers

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      TESEO-DRAW Dead Reckoning Automotive Way

      TESEOIII: GPS/Galileo/Glonass/BeiDou/QZSS standalone receiver

    • Description Version Size Action
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF
      EEPROM Advanced Automotive selection guide 1.0
      709.5 KB
      PDF
      Power amplifiers and voltage regulators
      750.29 KB
      PDF
      Smart power solutions for car body applications 4.0
      3.38 MB
      PDF

      Automotive-grade protection devices and rectifiers

      EEPROM Advanced Automotive selection guide

      Power amplifiers and voltage regulators

      Smart power solutions for car body applications

    • Description Version Size Action
      AEC-Q100-qualified for smart automotive sensors applications 01.2018
      1.17 MB
      PDF
      Driving smart power in automotive 1.0
      1.24 MB
      PDF
      MEMS sensors for automotive applications - brochure 1.0
      2.66 MB
      PDF

      AEC-Q100-qualified for smart automotive sensors applications

      Driving smart power in automotive

      MEMS sensors for automotive applications - brochure

eDesignSuite

Converter

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

Diodes (Power Schottky & FERD) Smart Selector

TVS Smart Selector

Automotive Analog and Power

Part number Description
L5300AH7 5V Low drop voltage regulator
L5300EPT 5 V low dropout voltage regulator
L5300GJ Standard Functions, Voltage Regulators
L5300RPT 5 V low dropout voltage regulator
L5963 Dual monolithic switching regulator with LDO and HSD
L9777 Low power voltage regulator
Part number
5V Low drop voltage regulator
5 V low dropout voltage regulator
Standard Functions, Voltage Regulators
5 V low dropout voltage regulator
Dual monolithic switching regulator with LDO and HSD
Low power voltage regulator

Automotive Infotainment and Telematics

Part number Description
FDA803D 1 x 45 W class D digital input automotive power amplifier with diagnostics, wide voltage operation range for car audio and telematics
STA8090GA Automotive Grade GPS/Galileo/Glonass/Beidou/QZSS receiver
TDA7577BLV Low voltage operation, high efficiency (class SB), intelligent, dual BTL output power amplifier with full I2C diagnostics including tweeter detection and hardware stand-by/mute
Part number
1 x 45 W class D digital input automotive power amplifier with diagnostics, wide voltage operation range for car audio and telematics
Automotive Grade GPS/Galileo/Glonass/Beidou/QZSS receiver
Low voltage operation, high efficiency (class SB), intelligent, dual BTL output power amplifier with full I2C diagnostics including tweeter detection and hardware stand-by/mute

Automotive Microcontrollers

Part number Description
SPC58EC80C3 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
Part number
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

EMI Filtering and Signal Conditioning

Part number Description
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
Part number
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter

MEMS and Sensors

Part number Description
A3G4250D 3-axis digital gyroscope for automotive telematics, navigation applications, AEC-Q100 qualified
AIS3624DQ 3-axis accelerometer for non-safety automotive applications, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
ASM330LHH Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope
Part number
3-axis digital gyroscope for automotive telematics, navigation applications, AEC-Q100 qualified
3-axis accelerometer for non-safety automotive applications, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope

Power Management

Part number Description
A6985F 38 V 0.5 A synchronous step-down switching regulator with 30 uA quiescent current
A6986 38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
A6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
Part number
38 V 0.5 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current

Protection Devices

Part number Description
ESDA14V2SC5Y Automotive quad-line TVS for ESD protection
ESDAXLC6-1BT2Y Automotive single-line bidirectional ESD protection for high speed interface
Part number
Automotive quad-line TVS for ESD protection
Automotive single-line bidirectional ESD protection for high speed interface

Secure MCUs

Part number Description
ST33G1M0A 32bit ARM® SecurCore® SC300 optimized for M2M for car
ST33J2M0 32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors
Part number
32bit ARM® SecurCore® SC300 optimized for M2M for car
32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors

Wireless Transceivers, MCUs and Modules

Part number Description
BlueNRG-1 Bluetooth Low Energy System On Chip
Part number
Bluetooth Low Energy System On Chip