Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Smartphones, tablets and eReaders combine of many of the most advanced electronics technologies available in the industry today into personal devices that have become ubiquitous around the global. These devices create many challenges for designers, as they need to combine sensors, cameras, processing, communications, batteries, displays, speakers, microphones, fingerprint sensors and other user interface technologies into a powerful, reliable, secure and ultra-efficient battery powered device.

ST provides a range of products to help designers meet these challenges and enable the design of leading-edge mobile devices.  We enhance the user experience with products such as motion and environmental sensors, MEMS microphones, Time-of-Flight solutions, image and optical sensors, audio headphone and speaker amplifiers, and touch-sensor controllers with multi-touch capabilities. We protect the device with integrated passive device technology, ESD protection and EMI filtering products and a range of analog products. We secure devices with secure element and secure Near Field Communication (NFC) solutions. And we power devices with high-efficiency power and energy management products optimized for battery powered devices, including touchscreen power management, and wireless charging solutions. We also improve connectivity with our RF product offer, which includes smart antenna tuning and RFSOI FEM solutions.

    • Part Number Description Status Core Products Price (US$)*
      Order / Download
      Teseo-LIV3F

      Key features

      • Simultaneously multiconstellation
      • -163 dBm navigation sensitivity
      • 1.5 m CEP accuracy positioning
      • 16 Mbit embedded Flash for data logging and FW upgrade
      • 2.1 V to 4.3 V supply voltage range
      • Tiny LCC 18 pin package (9.7x10.1)
      • Operating temperature (-40°, 85°C)
      • Free FW configuration
      • 17 μW standby current and 75 mW tracking power consumption

      Show more

      Tiny GNSS module
      Active
      13.94 Buy now
      EVB-LIV3F

      Key features

      • ST Teseo-LIV3F GNSS platform
      • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
      • USB Power Supply and battery charge
      • Internal battery footprint for standalone usage
      • ON/OFF and Reset buttons available
      • NMEA over
        • UART by USB
        • I2C by connector
      • PPS output
      • Leds:
        • PPS
        • Power

      Show more

      TESEO LIV3F module evaluation board
      Active
      165.38 Buy now
      TESEO-SUITE

      Key features

      • Multiple GNSS tracer
      • Multiple protocol support
      • GNSS firmware configuration tool
      • GNSS flashing tool
      • Dead reckoning panel
      • NMEA diagnostic tool
      • Satellites signal monitoring viewer
      • Map viewer
      • Log viewer

      Show more

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family
      Active
      -
      Software
      Part Number Software Version Marketing Status Supplier Download
      TESEO-SUITE 5.2.3 Active ST
      Teseo-LIV3F

      Description:

      Tiny GNSS module

      Price (US$)*

      13.94

      Key features

      • Simultaneously multiconstellation
      • -163 dBm navigation sensitivity
      • 1.5 m CEP accuracy positioning
      • 16 Mbit embedded Flash for data logging and FW upgrade
      • 2.1 V to 4.3 V supply voltage range
      • Tiny LCC 18 pin package (9.7x10.1)
      • Operating temperature (-40°, 85°C)
      • Free FW configuration
      • 17 μW standby current and 75 mW tracking power consumption

      Show more

      EVB-LIV3F

      Description:

      TESEO LIV3F module evaluation board

      Price (US$)*

      165.38

      Key features

      • ST Teseo-LIV3F GNSS platform
      • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
      • USB Power Supply and battery charge
      • Internal battery footprint for standalone usage
      • ON/OFF and Reset buttons available
      • NMEA over
        • UART by USB
        • I2C by connector
      • PPS output
      • Leds:
        • PPS
        • Power

      Show more

      TESEO-SUITE

      Description:

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

      Price (US$)*

      -
      Software

      Key features

      • Multiple GNSS tracer
      • Multiple protocol support
      • GNSS firmware configuration tool
      • GNSS flashing tool
      • Dead reckoning panel
      • NMEA diagnostic tool
      • Satellites signal monitoring viewer
      • Map viewer
      • Log viewer

      Show more

      Part Number Software Version Marketing Status Supplier Download
      TESEO-SUITE 5.2.3 Active ST

Part Number
Description
ST25DV-DISCOVERY Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability Quick view

Key Features

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-SMARTAG1 NFC Dynamic Tag sensor node evaluation board Quick view

Key Features

  • ST25DV64K dynamic NFC tag solution based on 64K-bit (8K-Byte) EEPROM and with I²C interface, Fast Transfer Mode and Energy Harvesting features
  • STM32L031K6 ultra-low-power ARM Cortex-M0+ MCU running at 32 MHz with 32-Kbytes Flash and 8-Kbytes RAM
  • LIS2DW12 ultra-low-power high-performance three-axis linear accelerometer
  • LPS22HB ultra-compact piezo-resistive absolute pressure sensor which functions as a digital output barometer: 260-1260 hPa
  • HTS221 capacitive digital sensor for relative humidity and temperature
  • STLQ015 low drop linear regulator power management
  • CR2032 Battery powered (not included)
  • STM32Cube function pack (FP-SNS-SMARTAG1)
  • Android (Google Play) and iOS demo apps (ST SmarTag)
  • Suitable for the following applications:
    • Internet of Things
    • Supply Chain and Cold-Chain Management
    • Smart building, home and city
    • Retail and apparel
    • Smart packaging
    • Medical and pharmaceutical
    • Batteryless sensing
    • Smart agriculture (soil control, animal tracking, etc.)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLCS02V1 SensorTile connectable sensor node: solder only Quick view

Key Features

  • Very compact module for motion, audio, environmental sensing and Bluetooth® low energy connectivity with a complete set of firmware examples
  • Mobile connectivity via the STBLESensor app, available for iOS™ and Android™
  • Main components:
    • STM32L476JG – 32-bit ultra-low-power MCU with Cortex® M4F
    • LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope
    • LSM303AGR – Ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer
    • LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer
    • MP34DT05-A – 64 dB SNR digital MEMS microphone
    • BlueNRG-MS – Bluetooth low energy network processor
    • BALF-NRG-02D3 – 50 Ω balun with integrated harmonic filter
    • LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V
  • 2 V - 5.5 V power supply range
  • External interfaces: UART, SPI, SAI (Serial Audio Interface), I²C, DFSDM, USB OTG, ADC, GPIOs
  • Solderable only interface (no connector on back side)
  • SWD interface for debugging and programming capability
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC certified
  • IC certified
  • TYPE certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

BOM Gerber
STEVAL-BCNKT01V1 BlueCoin Starter kit Quick view

Key Features

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BLUEMIC-1 Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module Quick view

Key Features

  • Bluetooth® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
  • On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
    • an ultra-low power ARM® Cortex® -M0 32-bit core architecture
    • programmable embedded 160 KB Flash
    • 24 KB embedded RAM with data retention
  • On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
  • On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
  • Voltage supply: 1V8 or 3V3
  • Battery or USB powered
  • 100 mAh Li-Ion battery
  • On-board STBC08 linear Li-Ion battery charger
  • SWD connector
  • Included in the development kit package:
    • STEVAL-BLUEMIC-1
    • Plastic box for housing STEVAL-BLUEMIC-1
    • 100 mAh Li-Ion battery
    • SWD programming cable
  • SW development kit for audio and inertial MEMS data streaming over BLE
  • ST BlueMS: Android and iOS demo App available in the respective stores
  • CE certified
  • RoHS and China RoHS compliant
  • Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
  • Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB042V1 Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33 Quick view

Key Features

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
M24SR-DISCOVERY Discovery kit for the M24SR series - Dynamic NFC/RFID tag Quick view

Key Features

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1 Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo Quick view

Key Features

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IKS01A1 Motion MEMS and environmental sensor expansion board for STM32 Nucleo Quick view

Key Features

  • LSM6DS0: MEMS 3D accelerometer (±2/±4/±8 g) + 3D gyroscope (±245/±500/±2000 dps)
  • LIS3MDL: MEMS 3D magnetometer (±4/ ±8/ ±12/ 16 gauss)
  • LPS25HB*: MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
  • HTS221: capacitive digital relative humidity and temperature
  • DIL 24-pin socket available for additional MEMS adapters and other sensors (UV index)
  • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDI003V2 Multi-sensor RF platform sensors board Quick view

Key Features

  • Contains the following ST sensors:
    • Pressure sensor LPS25HB
    • Humidity sensor HTS221
    • Accelerometer LIS3DH
    • Microphone MP34DT01
  • AFE for processing the MP34DT01 microphone signal based on TSV522 low power, low offset op-amp
  • Android app available
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-CCA02M1 Digital MEMS microphones expansion board based on MP34DT01-M for STM32 Nucleo. Quick view

Key Features

  • 2 on-board MP34DT01-M digital MEMS microphones
  • 6 slots to plug in digital microphone coupon boards such as STEVAL-MKI129Vx and STEVAL-MKI155Vx
  • Synchronized acquisition and streaming of up to 4 microphones
  • Free comprehensive development firmware library and audio capture plus USB streaming sample application which is compatible with STM32Cube firmware
  • Compatible with STM32 Nucleo boards
  • Equipped with ST morpho connector (upwards and downwards)
  • Equipped with Arduino UNO R3 connector (upwards) to allow multiple boards
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI109V3 Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters Quick view

Key Features

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLKT01V1 SensorTile development kit Quick view

Key Features

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLCS01V1 SensorTile connectable sensor node: plug or solder Quick view

Key Features

  • Very compact module for motion, audio, environmental sensing and Bluetooth® low energy connectivity with a complete set of firmware examples
  • Mobile connectivity via the STBLESensor app, available for iOS™ and Android™
  • Main components:
    • STM32L476JG – 32-bit ultra-low-power MCU with Cortex® M4F
    • LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope
    • LSM303AGR – Ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer
    • LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer
    • MP34DT05-A – 64 dB SNR digital MEMS microphone
    • BlueNRG-MS – Bluetooth low energy network processor
    • BALF-NRG-02D3 – 50 Ω balun with integrated harmonics filter
    • LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V
  • 2 V - 5.5 V power supply range
  • External interfaces: UART, SPI, SAI (serial audio interface), I²C, DFSDM, USB OTG, ADC, GPIOs
  • Pluggable or solderable interface
  • SWD interface for debugging and programming capability
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC certified
  • IC certified
  • TYPE certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IKS01A2 Motion MEMS and environmental sensor expansion board for STM32 Nucleo Quick view

Key Features

  • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
  • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
  • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
  • HTS221: capacitive digital relative humidity and temperature
  • DIL24 socket for additional MEMS adapters and other sensors
  • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
  • I²C sensor hub features on LSM6DSL available
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1 Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo Quick view

Key Features

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
Part Number
ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

Key Features

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-SMARTAG1

NFC Dynamic Tag sensor node evaluation board

Key Features

  • ST25DV64K dynamic NFC tag solution based on 64K-bit (8K-Byte) EEPROM and with I²C interface, Fast Transfer Mode and Energy Harvesting features
  • STM32L031K6 ultra-low-power ARM Cortex-M0+ MCU running at 32 MHz with 32-Kbytes Flash and 8-Kbytes RAM
  • LIS2DW12 ultra-low-power high-performance three-axis linear accelerometer
  • LPS22HB ultra-compact piezo-resistive absolute pressure sensor which functions as a digital output barometer: 260-1260 hPa
  • HTS221 capacitive digital sensor for relative humidity and temperature
  • STLQ015 low drop linear regulator power management
  • CR2032 Battery powered (not included)
  • STM32Cube function pack (FP-SNS-SMARTAG1)
  • Android (Google Play) and iOS demo apps (ST SmarTag)
  • Suitable for the following applications:
    • Internet of Things
    • Supply Chain and Cold-Chain Management
    • Smart building, home and city
    • Retail and apparel
    • Smart packaging
    • Medical and pharmaceutical
    • Batteryless sensing
    • Smart agriculture (soil control, animal tracking, etc.)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLCS02V1

SensorTile connectable sensor node: solder only

Key Features

  • Very compact module for motion, audio, environmental sensing and Bluetooth® low energy connectivity with a complete set of firmware examples
  • Mobile connectivity via the STBLESensor app, available for iOS™ and Android™
  • Main components:
    • STM32L476JG – 32-bit ultra-low-power MCU with Cortex® M4F
    • LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope
    • LSM303AGR – Ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer
    • LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer
    • MP34DT05-A – 64 dB SNR digital MEMS microphone
    • BlueNRG-MS – Bluetooth low energy network processor
    • BALF-NRG-02D3 – 50 Ω balun with integrated harmonic filter
    • LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V
  • 2 V - 5.5 V power supply range
  • External interfaces: UART, SPI, SAI (Serial Audio Interface), I²C, DFSDM, USB OTG, ADC, GPIOs
  • Solderable only interface (no connector on back side)
  • SWD interface for debugging and programming capability
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC certified
  • IC certified
  • TYPE certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

BOM Gerber
STEVAL-BCNKT01V1

BlueCoin Starter kit

Key Features

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BLUEMIC-1

Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module

Key Features

  • Bluetooth® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
  • On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
    • an ultra-low power ARM® Cortex® -M0 32-bit core architecture
    • programmable embedded 160 KB Flash
    • 24 KB embedded RAM with data retention
  • On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
  • On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
  • Voltage supply: 1V8 or 3V3
  • Battery or USB powered
  • 100 mAh Li-Ion battery
  • On-board STBC08 linear Li-Ion battery charger
  • SWD connector
  • Included in the development kit package:
    • STEVAL-BLUEMIC-1
    • Plastic box for housing STEVAL-BLUEMIC-1
    • 100 mAh Li-Ion battery
    • SWD programming cable
  • SW development kit for audio and inertial MEMS data streaming over BLE
  • ST BlueMS: Android and iOS demo App available in the respective stores
  • CE certified
  • RoHS and China RoHS compliant
  • Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
  • Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB042V1

Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33

Key Features

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
M24SR-DISCOVERY

Discovery kit for the M24SR series - Dynamic NFC/RFID tag

Key Features

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

Key Features

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IKS01A1

Motion MEMS and environmental sensor expansion board for STM32 Nucleo

Key Features

  • LSM6DS0: MEMS 3D accelerometer (±2/±4/±8 g) + 3D gyroscope (±245/±500/±2000 dps)
  • LIS3MDL: MEMS 3D magnetometer (±4/ ±8/ ±12/ 16 gauss)
  • LPS25HB*: MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
  • HTS221: capacitive digital relative humidity and temperature
  • DIL 24-pin socket available for additional MEMS adapters and other sensors (UV index)
  • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDI003V2

Multi-sensor RF platform sensors board

Key Features

  • Contains the following ST sensors:
    • Pressure sensor LPS25HB
    • Humidity sensor HTS221
    • Accelerometer LIS3DH
    • Microphone MP34DT01
  • AFE for processing the MP34DT01 microphone signal based on TSV522 low power, low offset op-amp
  • Android app available
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-CCA02M1

Digital MEMS microphones expansion board based on MP34DT01-M for STM32 Nucleo.

Key Features

  • 2 on-board MP34DT01-M digital MEMS microphones
  • 6 slots to plug in digital microphone coupon boards such as STEVAL-MKI129Vx and STEVAL-MKI155Vx
  • Synchronized acquisition and streaming of up to 4 microphones
  • Free comprehensive development firmware library and audio capture plus USB streaming sample application which is compatible with STM32Cube firmware
  • Compatible with STM32 Nucleo boards
  • Equipped with ST morpho connector (upwards and downwards)
  • Equipped with Arduino UNO R3 connector (upwards) to allow multiple boards
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI109V3

Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters

Key Features

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLKT01V1

SensorTile development kit

Key Features

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLCS01V1

SensorTile connectable sensor node: plug or solder

Key Features

  • Very compact module for motion, audio, environmental sensing and Bluetooth® low energy connectivity with a complete set of firmware examples
  • Mobile connectivity via the STBLESensor app, available for iOS™ and Android™
  • Main components:
    • STM32L476JG – 32-bit ultra-low-power MCU with Cortex® M4F
    • LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope
    • LSM303AGR – Ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer
    • LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer
    • MP34DT05-A – 64 dB SNR digital MEMS microphone
    • BlueNRG-MS – Bluetooth low energy network processor
    • BALF-NRG-02D3 – 50 Ω balun with integrated harmonics filter
    • LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V
  • 2 V - 5.5 V power supply range
  • External interfaces: UART, SPI, SAI (serial audio interface), I²C, DFSDM, USB OTG, ADC, GPIOs
  • Pluggable or solderable interface
  • SWD interface for debugging and programming capability
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC certified
  • IC certified
  • TYPE certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IKS01A2

Motion MEMS and environmental sensor expansion board for STM32 Nucleo

Key Features

  • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
  • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
  • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
  • HTS221: capacitive digital relative humidity and temperature
  • DIL24 socket for additional MEMS adapters and other sensors
  • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
  • I²C sensor hub features on LSM6DSL available
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

Key Features

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

Technical Documentation

    • Description Version Size Action
      DB2379
      300 mA triple DC-DC converter for powering AMOLED displays
      2.0
      333.96 KB
      PDF
      DS12218
      Multi-mode Qi/AirFuel inductive wireless power receiver for 15 W applications with transmitter functions
      2.0
      2.47 MB
      PDF
      DB3196
      Multi-mode Qi/AirFuel inductive wireless power receiver with transmitter function
      1.0
      458.09 KB
      PDF
      DB2656
      Ultra low-power capacitive multi-touch screen controller for 2” to 13” screens
      1.0
      189.25 KB
      PDF
      DB2379

      300 mA triple DC-DC converter for powering AMOLED displays

      DS12218

      Multi-mode Qi/AirFuel inductive wireless power receiver for 15 W applications with transmitter functions

      DB3196

      Multi-mode Qi/AirFuel inductive wireless power receiver with transmitter function

      DB2656

      Ultra low-power capacitive multi-touch screen controller for 2” to 13” screens

    • Description Version Size Action
      AN5085
      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process
      2.0
      306.83 KB
      PDF
      AN4653
      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process
      1.0
      267.34 KB
      PDF
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx
      1.0
      585.2 KB
      PDF
      AN2862
      Demonstration board user guidelines for the TS2007FC 3 W filter-free class D audio amplifier with 6-12 dB fixed gain select
      1.2
      147.45 KB
      PDF
      AN3261
      Dual push-button Smart Reset™ devices with user-adjustable setup delays
      1.1
      630.21 KB
      PDF
      AN4913
      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication
      1.0
      1.05 MB
      PDF
      AN4503
      Environmental sensors: Hardware abstraction layer for Android
      3.0
      241.61 KB
      PDF
      AN4722
      HTS221 digital humidity sensor: hardware guidelines for system integration
      1.0
      844.49 KB
      PDF
      AN2866
      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags
      3.0
      615.85 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN2648
      Increasing the resolution of analog temperature sensors
      1.4
      161.7 KB
      PDF
      AN4506
      L3GD20H: 3-axis digital output gyroscope
      2.0
      1.35 MB
      PDF
      AN4748
      LIS2DS12: always-on 3D accelerometer
      5.0
      817.27 KB
      PDF
      AN5038
      LIS2DW12: always-on 3D accelerometer
      3.0
      1.18 MB
      PDF
      AN5069
      LIS2MDL: ultra-low-power, high-performance 3D magnetometer
      2.0
      415.45 KB
      PDF
      AN4672
      LPS22HB/LPS25HB digital pressure sensors: hardware guidelines for system integration
      3.0
      1,005.15 KB
      PDF
      AN5063
      LPS33HW digital pressure sensor: guidelines for system integration
      1.0
      681.3 KB
      PDF
      AN5040
      LSM6DSL: always-on 3D accelerometer and 3D gyroscope
      3.0
      1.5 MB
      PDF
      AN4987
      LSM6DSM: always-on 3D accelerometer and 3D gyroscope
      5.0
      1.73 MB
      PDF
      AN5113
      MEMS motion sensor: L20G20IS ultra-compact two-axis gyroscope for optical image stabilization
      1.0
      397.22 KB
      PDF
      AN4833
      Measuring pressure data from ST's LPS22HB digital pressure sensor
      2.0
      923.98 KB
      PDF
      AN1957
      Microprocessor supervisor functions
      2.0
      577.14 KB
      PDF
      AN4911
      NDEF management with ST25DVxxx and ST25TVxxx products
      4.0
      460.67 KB
      PDF
      AN4508
      Parameters and calibration of a low-g 3-axis accelerometer
      1.0
      303.76 KB
      PDF
      AN1336
      Power-fail comparator for NVRAM supervisory devices
      2.0
      127.81 KB
      PDF
      AN4598
      Pre-amplifying the analog output of a MEMS microphone
      1.0
      325.46 KB
      PDF
      AN1012
      Predicting the battery life and data retention period of NVRAMs and serial RTCs
      4.1
      439.45 KB
      PDF
      AN1000
      Reduced footprint ZEROPOWER® and TIMEKEEPER® supervisor surface-mount solution
      2.0
      62.06 KB
      PDF
      AN4870
      STC3117 system integration
      1.0
      1.44 MB
      PDF
      AN2526
      STMAV340 evaluation board and PCB layout recommendation
      1.3
      179.39 KB
      PDF
      AN4433
      Storing data into the NDEF memory of M24SR
      2.0
      507.23 KB
      PDF
      AN2621
      TS488/9 low power stereo headphone amplifier evaluation board user guidelines
      1.2
      67.97 KB
      PDF
      AN2622
      TS4909 low power stereo headphone amplifier evaluation board user guidelines
      1.2
      105.14 KB
      PDF
      AN2406
      TS4962IQ class D audio amplifier evaluation board user guidelines
      2.3
      135.67 KB
      PDF
      AN1766
      TS4990 low voltage audio power amplifier evaluation board user guidelines
      3.2
      104.79 KB
      PDF
      AN2474
      TS4995 1.2W fully differential audio power amplifier with selectable standby and 6db fixed gain - evaluation board user guidelines
      1.4
      127.69 KB
      PDF
      AN4509
      Tilt measurement using a low-g 3-axis accelerometer
      1.1
      248.93 KB
      PDF
      AN4825
      Ultra-compact high-performance eCompass module based on the LSM303AGR
      1.0
      1.67 MB
      PDF
      AN2240
      Using the demonstration board for the TS472 low noise microphone preamplifier with 2 V bias
      4.2
      236.53 KB
      PDF
      AN2483
      Video signal standards
      1.2
      42.72 KB
      PDF
      AN4866
      Water resistant features
      1.0
      1.02 MB
      PDF
      AN1471
      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?
      4.4
      72.36 KB
      PDF
      AN5085

      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process

      AN4653

      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process

      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx

      AN2862

      Demonstration board user guidelines for the TS2007FC 3 W filter-free class D audio amplifier with 6-12 dB fixed gain select

      AN3261

      Dual push-button Smart Reset™ devices with user-adjustable setup delays

      AN4913

      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication

      AN4503

      Environmental sensors: Hardware abstraction layer for Android

      AN4722

      HTS221 digital humidity sensor: hardware guidelines for system integration

      AN2866

      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags

      AN2972

      How to design an antenna for dynamic NFC tags

      AN2648

      Increasing the resolution of analog temperature sensors

      AN4506

      L3GD20H: 3-axis digital output gyroscope

      AN4748

      LIS2DS12: always-on 3D accelerometer

      AN5038

      LIS2DW12: always-on 3D accelerometer

      AN5069

      LIS2MDL: ultra-low-power, high-performance 3D magnetometer

      AN4672

      LPS22HB/LPS25HB digital pressure sensors: hardware guidelines for system integration

      AN5063

      LPS33HW digital pressure sensor: guidelines for system integration

      AN5040

      LSM6DSL: always-on 3D accelerometer and 3D gyroscope

      AN4987

      LSM6DSM: always-on 3D accelerometer and 3D gyroscope

      AN5113

      MEMS motion sensor: L20G20IS ultra-compact two-axis gyroscope for optical image stabilization

      AN4833

      Measuring pressure data from ST's LPS22HB digital pressure sensor

      AN1957

      Microprocessor supervisor functions

      AN4911

      NDEF management with ST25DVxxx and ST25TVxxx products

      AN4508

      Parameters and calibration of a low-g 3-axis accelerometer

      AN1336

      Power-fail comparator for NVRAM supervisory devices

      AN4598

      Pre-amplifying the analog output of a MEMS microphone

      AN1012

      Predicting the battery life and data retention period of NVRAMs and serial RTCs

      AN1000

      Reduced footprint ZEROPOWER® and TIMEKEEPER® supervisor surface-mount solution

      AN4870

      STC3117 system integration

      AN2526

      STMAV340 evaluation board and PCB layout recommendation

      AN4433

      Storing data into the NDEF memory of M24SR

      AN2621

      TS488/9 low power stereo headphone amplifier evaluation board user guidelines

      AN2622

      TS4909 low power stereo headphone amplifier evaluation board user guidelines

      AN2406

      TS4962IQ class D audio amplifier evaluation board user guidelines

      AN1766

      TS4990 low voltage audio power amplifier evaluation board user guidelines

      AN2474

      TS4995 1.2W fully differential audio power amplifier with selectable standby and 6db fixed gain - evaluation board user guidelines

      AN4509

      Tilt measurement using a low-g 3-axis accelerometer

      AN4825

      Ultra-compact high-performance eCompass module based on the LSM303AGR

      AN2240

      Using the demonstration board for the TS472 low noise microphone preamplifier with 2 V bias

      AN2483

      Video signal standards

      AN4866

      Water resistant features

      AN1471

      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?

    • Description Version Size Action
      TN1219
      HTS221 digital humidity sensor: reference design implementation
      2.0
      367.08 KB
      PDF
      TN1229
      How to interpret pressure and temperature readings in the LPS22HB pressure sensor
      1.0
      211.13 KB
      PDF
      TN1251
      How to interpret pressure and temperature readings in the LPS33HW pressure sensor
      1.0
      197.58 KB
      PDF
      TN1218
      Interpreting humidity and temperature readings in the HTS221 digital humidity sensor
      4.0
      3.67 MB
      PDF
      TN0941
      Reset and supervisor ICs: frequently asked questions (FAQ)
      1.0
      328.63 KB
      PDF
      TN1198
      Surface mount guidelines for MEMS sensors in HLGA packages
      1.0
      128.17 KB
      PDF
      TN0018
      Surface mounting guidelines for MEMS sensors in an LGA package
      6.0
      214.31 KB
      PDF
      TN1219

      HTS221 digital humidity sensor: reference design implementation

      TN1229

      How to interpret pressure and temperature readings in the LPS22HB pressure sensor

      TN1251

      How to interpret pressure and temperature readings in the LPS33HW pressure sensor

      TN1218

      Interpreting humidity and temperature readings in the HTS221 digital humidity sensor

      TN0941

      Reset and supervisor ICs: frequently asked questions (FAQ)

      TN1198

      Surface mount guidelines for MEMS sensors in HLGA packages

      TN0018

      Surface mounting guidelines for MEMS sensors in an LGA package

    • Description Version Size Action
      DT0053
      6-point tumble sensor calibration
      1.0
      464.9 KB
      PDF
      DT0076
      Compensating for accelerometer installation error: zeroing pitch and roll for a reference orientation
      1.0
      490.58 KB
      PDF
      DT0058
      Computing tilt measurement and tilt-compensated e-compass
      2.0
      734.36 KB
      PDF
      DT0059
      Ellipsoid or sphere fitting for sensor calibration
      3.0
      572.59 KB
      PDF
      DT0060
      Exploiting the gyroscope to update tilt measure and e-compass
      2.0
      657.92 KB
      PDF
      DT0096
      LPS33HW digital pressure sensor: hardware guidelines for system integration
      1.0
      233.85 KB
      PDF
      DT0097
      Setting up 6D orientation detection with ST's MEMS accelerometers
      1.0
      550.71 KB
      PDF
      DT0100
      Setting up free-fall recognition with ST's MEMS accelerometers
      1.0
      375.78 KB
      PDF
      DT0101
      Setting up single-tap and double-tap recognition with ST's MEMS accelerometers
      1.0
      440.6 KB
      PDF
      DT0098
      Setting up wake-up recognition and absolute/relative references with ST's MEMS accelerometers
      1.0
      687.53 KB
      PDF
      DT0053

      6-point tumble sensor calibration

      DT0076

      Compensating for accelerometer installation error: zeroing pitch and roll for a reference orientation

      DT0058

      Computing tilt measurement and tilt-compensated e-compass

      DT0059

      Ellipsoid or sphere fitting for sensor calibration

      DT0060

      Exploiting the gyroscope to update tilt measure and e-compass

      DT0096

      LPS33HW digital pressure sensor: hardware guidelines for system integration

      DT0097

      Setting up 6D orientation detection with ST's MEMS accelerometers

      DT0100

      Setting up free-fall recognition with ST's MEMS accelerometers

      DT0101

      Setting up single-tap and double-tap recognition with ST's MEMS accelerometers

      DT0098

      Setting up wake-up recognition and absolute/relative references with ST's MEMS accelerometers

Presentations & Training Material

    • Description Version Size Action
      EEPROM in WLCSP July 2016 1.4
      281.42 KB
      PDF
      I2C EEPROM in DFN5 small package 1.0
      555.19 KB
      PDF
      M24SR Product Presentation 2.1
      1.27 MB
      PDF
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF

      EEPROM in WLCSP July 2016

      I2C EEPROM in DFN5 small package

      M24SR Product Presentation

      ST25DV-I2C product presentation

Publications and Collaterals

    • Description Version Size Action
      3-axis digital gyroscopes for enhanced motion-control realism and image stabilization 2.0
      1.08 MB
      PDF
      APWorkbench software for audio ICs and MEMS microphones 1.0
      2.29 MB
      PDF
      EEPROM in Ultra-small packages 1.0
      1.22 MB
      PDF
      LIS2DW12 Flexible ultra-low-power 3-axis smart accelerometer 1.0
      1.35 MB
      PDF
      LSM6DSM iNEMO® always-on 6-axis inertial module
      663.83 KB
      PDF
      MEMS analog and digital microphones
      989.69 KB
      PDF
      NFC / RFID tags M24SR series 2.0
      1.24 MB
      PDF
      ST25DV-I2C series - Dynamic NFC/RFID tags 1.0
      1.47 MB
      PDF
      Serial EEPROM 1.0
      1.73 MB
      PDF

      3-axis digital gyroscopes for enhanced motion-control realism and image stabilization

      APWorkbench software for audio ICs and MEMS microphones

      EEPROM in Ultra-small packages

      LIS2DW12 Flexible ultra-low-power 3-axis smart accelerometer

      LSM6DSM iNEMO® always-on 6-axis inertial module

      MEMS analog and digital microphones

      NFC / RFID tags M24SR series

      ST25DV-I2C series - Dynamic NFC/RFID tags

      Serial EEPROM

    • Description Version Size Action
      EEPROM selection guide 2.0
      843.56 KB
      PDF

      EEPROM selection guide

    • Description Version Size Action
      Brochure Secure MCUs - Secure Solutions 1.2
      1.11 MB
      PDF
      NFC solutions from ST 1.0
      3.53 MB
      PDF
      Products and solutions for Wearable devices 1.0
      2 MB
      PDF
      ST’s solutions for mobile devices 3.2
      2.13 MB
      PDF

      Brochure Secure MCUs - Secure Solutions

      NFC solutions from ST

      Products and solutions for Wearable devices

      ST’s solutions for mobile devices

    • Description Version Size Action
      Optical Image Stabilization (OIS) - white paper 1.0
      3.01 MB
      PDF

      Optical Image Stabilization (OIS) - white paper

Embedded Software

    • Part Number

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

    • Part Number

      Graphical user interface for the STEVAL-ISB042V1 evaluation board based on STWLC33

      Unico Lite - source code

      Unico GUI - MEMS evaluation kit software package for Linux

      Unico GUI - MEMS evaluation kit software package for Mac OSX

      Unico GUI - MEMS evaluation kit software package for Windows

      GUI for X-CUBE-MEMS1, motion MEMS and environmental sensor software expansion for STM32Cube

    • Part Number

      STM32 ODE function pack for IoT node with BLE connectivity, digital microphone, environmental and motion sensors

      STM32Cube function pack for IoT node with BLE connectivity and environmental and motion sensors

      Sensor and DSP algorithm software expansion for STM32Cube

      Sensor and motion algorithm software expansion for STM32Cube

      Digital MEMS microphones acquisition and processing software expansion for STM32Cube

      STM32Cube expansion software for X-NUCLEO-NFC01A1

      Dynamic NFC/RFID tag IC software expansion for STM32Cube

      High performance HF reader/NFC initiator IC software expansion for STM32Cube

    • Part Number

      Application for the graphical design of algorithms

      Android sensor HAL for MEMS motion and environmental sensors (Industrial I/O framework)

      Android sensor HAL for MEMS motion and environmental sensors (Input framework)

      Standard C platform-independent drivers for MEMS motion and environmental sensors

      Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)

      Linux device drivers for MEMS motion and environmental sensors (Input framework)

    • Part Number

      Application executable of the "NFC Tap" Android app for ST25 product family

      Firmware for ST25DV-DISCOVERY kit

      Application executable of the "NFC Tap" iOS app for ST25 product family

      Antenna Matching Tool for ST25R NFC/HF reader family

      Software Development Kit for ST25 Tags and Dynamic Tags

Audio ICs

Part number Description
TS488 Pop-free 120mW stereo headphone amplifier
TS4962M 3 W filter-free class D audio power amplifier
Part number
Pop-free 120mW stereo headphone amplifier
3 W filter-free class D audio power amplifier

EMI Filtering and Signal Conditioning

Part number Description
BALF-CC26-05D3 50 Ω / conjugate match to CC2610, CC2620, CC2630, CC2640 and CC2650
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI2-01D3 50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter
BALF-SPI2-02D3 50 Ω nominal input / conjugate match balun to S2-LP, 433 - 470 MHz with integrated harmonic filter
ECMF4-20A42N10 Common mode filter with ESD protection
ECMF4-2450A17M10 Common-mode filter with ESD protection for high-speed serial interfaces
STHVDAC-256MTG Antenna tuning circuit with TURBO & GLIDE
STPTIC-27L2 Parascan™ tunable integrated capacitor
STPTIC-39G2 3p9 Tunable capacitor
STPTIC-82G2 8p2 Tunable capacitor
Part number
50 Ω / conjugate match to CC2610, CC2620, CC2630, CC2640 and CC2650
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter
50 Ω nominal input / conjugate match balun to S2-LP, 433 - 470 MHz with integrated harmonic filter
Common mode filter with ESD protection
Common-mode filter with ESD protection for high-speed serial interfaces
Antenna tuning circuit with TURBO & GLIDE
Parascan™ tunable integrated capacitor
3p9 Tunable capacitor
8p2 Tunable capacitor

MEMS and Sensors

Part number Description
L20G20IS 2-axis gyroscope for optical image stabilization (OIS)
LIS2DS12 3-axis MEMS accelerometer, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, ultra-low-power, high-performance acceleration sensor
LPS22HB Ultra-compact piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold, holed LGA package (HLGA)
LSM6DSL iNEMO 6DoF inertial measurement unit (IMU), for smart phones and battery operated IoT, Gaming, Wearable and Consumer Electronics. Ultra-low power and high accuracy
LSM6DSM iNEMO 6DoF inertial measurement unit (IMU), for smart phones with OIS / EIS and AR/VR systems. Ultra-low power, high accuracy and stability
Part number
2-axis gyroscope for optical image stabilization (OIS)
3-axis MEMS accelerometer, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, ultra-low-power, high-performance acceleration sensor
Ultra-compact piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold, holed LGA package (HLGA)
iNEMO 6DoF inertial measurement unit (IMU), for smart phones and battery operated IoT, Gaming, Wearable and Consumer Electronics. Ultra-low power and high accuracy
iNEMO 6DoF inertial measurement unit (IMU), for smart phones with OIS / EIS and AR/VR systems. Ultra-low power, high accuracy and stability

NFC

Part number Description
ST25DV04K 4-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting
Part number
4-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting

Power Management

Part number Description
LD56050 500mA ultra low dropout linear regulator with bias supply
LD56100 1A very low dropout fast transient ultra-low noise linear regulator
LD59030 300 mA very low dropout current linear regulator IC
LDLN025 250 mA ultra-low noise LDO
STC3117 Gas gauge IC with battery charger control for handheld applications
Part number
500mA ultra low dropout linear regulator with bias supply
1A very low dropout fast transient ultra-low noise linear regulator
300 mA very low dropout current linear regulator IC
250 mA ultra-low noise LDO
Gas gauge IC with battery charger control for handheld applications

Protection Devices

Part number Description
ESDA22P150-1U3M High Power Transient Voltage Suppressor
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
ESDZV5-1BU2 Ultra Low clamping single line bidirectional ESD protection
Part number
High Power Transient Voltage Suppressor
High-power transient voltage supressor (TVS)
Ultra Low clamping single line bidirectional ESD protection

Reset and Supervisor ICs

Part number Description
STM6519 Single push-button Smart Reset
STM6520 Dual push-button smart reset with push-button controlled output delay
Part number
Single push-button Smart Reset
Dual push-button smart reset with push-button controlled output delay

Secure MCUs

Part number Description
ST21NFCD NFC Controller supporting Active Load Modulation booster
ST33J2M0 32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors
ST54H SIP (ST21NFCD controller & ST33J2M0 Secure Element)
Part number
NFC Controller supporting Active Load Modulation booster
32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors
SIP (ST21NFCD controller & ST33J2M0 Secure Element)

Touch and Display Controllers

Part number Description
FingerTip Multi-Touch Screen Controller with Ultra-Low Power
Part number
Multi-Touch Screen Controller with Ultra-Low Power