Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Firmware-over-the-air (FOTA) services enable firmware downloads and updates for any of the specific electronic control units (ECUs) inside a car. With the number of ECUs in vehicles increasing, sharing diagnostic and operational data from on-board systems and components can help car makers to reduce recall expenses, increase product quality and operational efficiency, as well as deliver post-sale vehicle performance and feature enhancements.

Updates need resilience to cyberattacks – cybersecurity – is of paramount importance.

We offer a full range of telematics processors, 32-bit microcontrollers and secure elements, ensuring the highest level of security and helping protect vehicles from malicious attacks.

Part Number
Description
SPC58EC-DISP Discovery Kit for SPC58EC - C line Quick view

Key Features

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SPC58NG-DISP Discovery Kit for SPC58NG - G line Quick view

Key Features

  • Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
  • 2 Ethernet ports
  • 1 CAN FD port (DB9 connector)
  • JTAG interface (14 pin - 2x7 connector)
  • 2 Push buttons, 4 LEDs for user purposes, reset push button
  • Board Supply: 12 VDC (external power supply)
  • Connector suitable for TFT LCD module
  • Board size 145 x 105 mm

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SAMPLES-AUTOPMIC Automotive Voltage Regulators & System Basis Chip Evaluation Tool Quick view

Key Features

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal Quick view

Key Features

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986 Quick view

Key Features

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL-L5963 L5963 Evaluation board Quick view

Key Features

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

FEATURED RESOURCES

Schematics Gerber
EVAL-L5963Q L5963Q evaluation board Quick view

Key Features

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

SPC582B-DIS Discovery Kit for SPC582 B line Quick view

Key Features

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
Part Number
SPC58EC-DISP

Discovery Kit for SPC58EC - C line

Key Features

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SPC58NG-DISP

Discovery Kit for SPC58NG - G line

Key Features

  • Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
  • 2 Ethernet ports
  • 1 CAN FD port (DB9 connector)
  • JTAG interface (14 pin - 2x7 connector)
  • 2 Push buttons, 4 LEDs for user purposes, reset push button
  • Board Supply: 12 VDC (external power supply)
  • Connector suitable for TFT LCD module
  • Board size 145 x 105 mm

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SAMPLES-AUTOPMIC

Automotive Voltage Regulators & System Basis Chip Evaluation Tool

Key Features

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

Key Features

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

STEVAL-ISA158V1

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

Key Features

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL-L5963

L5963 Evaluation board

Key Features

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

FEATURED RESOURCES

Schematics Gerber
EVAL-L5963Q

L5963Q evaluation board

Key Features

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

SPC582B-DIS

Discovery Kit for SPC582 B line

Key Features

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN4218
      Hardware design guideline power supply and voltage measurement
      3.0
      1.4 MB
      PDF
      AN2689
      Protection of automotive electronics from electrical hazards, guidelines for design and component selection
      3.1
      797.51 KB
      PDF
      AN4869
      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade
      5.0
      1.02 MB
      PDF
      AN4218

      Hardware design guideline power supply and voltage measurement

      AN2689

      Protection of automotive electronics from electrical hazards, guidelines for design and component selection

      AN4869

      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade

    • Description Version Size Action
      TN0897
      ST SPI protocol
      2.2
      420.96 KB
      PDF
      TN0897

      ST SPI protocol

Presentations & Training Material

    • Description Version Size Action
      Automotive Security implementation for Secure Driving 1.0
      1.52 MB
      PDF
      EEPROM Advanced Automotive products 1.0
      671.53 KB
      PDF

      Automotive Security implementation for Secure Driving

      EEPROM Advanced Automotive products

Publications and Collaterals

    • Description Version Size Action
      A698x family High-performance automotive synchronous DC-DC converters 1.0
      1.13 MB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.0
      718.85 KB
      PDF
      Automotive multichannel power management ICs 1.0
      698.09 KB
      PDF
      Processor for Telematics and Connectivity 1.0
      5.69 MB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      SOD128Flat Automotive-grade rectifiers 1.0
      1.42 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      Telemaco3P : Automotive Processor for Secure Telematics and Connectivity 1.0
      712.64 KB
      PDF

      A698x family High-performance automotive synchronous DC-DC converters

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      Automotive multichannel power management ICs

      Processor for Telematics and Connectivity

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      SOD128Flat Automotive-grade rectifiers

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      Telemaco3P : Automotive Processor for Secure Telematics and Connectivity

    • Description Version Size Action
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF
      EEPROM Advanced Automotive selection guide 1.0
      709.5 KB
      PDF
      Power amplifiers and voltage regulators
      750.29 KB
      PDF
      Smart power solutions for car body applications 4.0
      3.38 MB
      PDF

      Automotive-grade protection devices and rectifiers

      EEPROM Advanced Automotive selection guide

      Power amplifiers and voltage regulators

      Smart power solutions for car body applications

    • Description Version Size Action
      Driving smart power in automotive 1.0
      1.24 MB
      PDF
      SPC58 C-line 1.0
      933.22 KB
      PDF

      Driving smart power in automotive

      SPC58 C-line

Design Tools

    • Part Number

      Smart Selector for Micro 32bit Power Architecture products

Development Tools

    • Part Number

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

Embedded Software

    • Part Number

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

eDesignSuite

Converter

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

Diodes (Power Schottky & FERD) Smart Selector

TVS Smart Selector

Automotive Analog and Power

Part number Description
L5963 Dual monolithic switching regulator with LDO and HSD
Part number
Dual monolithic switching regulator with LDO and HSD

Automotive Microcontrollers

Part number Description
SPC58EC80C3 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
Part number
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

Power Management

Part number Description
A6985F 38 V 0.5 A synchronous step-down switching regulator with 30 uA quiescent current
A6986 38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
A6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
Part number
38 V 0.5 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current

Secure MCUs

Part number Description
ST33G1M0A 32bit ARM® SecurCore® SC300 optimized for M2M for car
Part number
32bit ARM® SecurCore® SC300 optimized for M2M for car