SPC564A80L7

Active
Education

32-bit Power Architecture MCU for Automotive Powertrain Applications

Download datasheet
Overview
Online design
Sample & Buy
Solutions
Documentation
CAD Resources
Tools & Software
Quality & Reliability
Partner products
Sales Briefcase

Product overview

Description

The microcontroller’s e200z4 host processor core is built on Power Architecture technology and designed specifically for embedded applications. In addition to the Power Architecture technology, this core supports instructions for digital signal processing (DSP).
  • All features

    • 150 MHz e200z4 Power Architecture core
      • Variable length instruction encoding (VLE)
      • Superscalar architecture with 2 execution units
      • Up to 2 integer or floating point instructions per cycle
      • Up to 4 multiply and accumulate operations per cycle
    • Memory organization
      • 4 MB on-chip flash memory with ECC and Read While Write (RWW)
      • 192 KB on-chip RAM with standby functionality (32 KB) and ECC
      • 8 KB instruction cache (with line locking), configurable as 2- or 4-way
      • 14 + 3 KB eTPU code and data RAM
      • 5 × 4 crossbar switch (XBAR)
      • 24-entry MMU
      • External Bus Interface (EBI) with slave and master port
    • Fail Safe Protection
      • 16-entry Memory Protection Unit (MPU)
      • CRC unit with 3 sub-modules
      • Junction temperature sensor
    • Interrupts
      • Configurable interrupt controller (with NMI)
      • 64-channel DMA
    • Serial channels
      • 3 × eSCI
      • 3 × DSPI (2 of which support downstream Micro Second Channel [MSC])
      • 3 × FlexCAN with 64 messages each
      • 1 × FlexRay module (V2.1) up to 10 Mbit/s with dual or single channel and 128 message objects and ECC
    • 1 × eMIOS
      • 24 unified channels
    • 1 × eTPU2 (second generation eTPU)
      • 32 standard channels
      • 1 × reaction module (6 channels with three outputs per channel)
    • 2 enhanced queued analog-to-digital converters (eQADCs)
      • Forty 12-bit input channels (multiplexed on 2 ADCs); expandable to 56 channels with external multiplexers
      • 6 command queues
      • Trigger and DMA support
      • 688 ns minimum conversion time
    • On-chip CAN/SCI/FlexRay Bootstrap loader with Boot Assist Module (BAM)
    • Nexus: Class 3+ for core; Class 1 for the eTPU
    • JTAG (5-pin)
    • Development Trigger Semaphore (DTS)
    • Clock generation
      • On-chip 4–40 MHz main oscillator
      • On-chip FMPLL (frequency-modulated phase-locked loop)
    • Up to 120 general purpose I/O lines
      • Individually programmable as input, output or special function
      • Programmable threshold (hysteresis)
    • Power reduction mode: slow, stop and stand-by modes
    • Flexible supply scheme
      • 5 V single supply with external ballast
      • Multiple external supply: 5 V, 3.3 V and 1.2 V
    • Designed for LQFP176, LBGA208, PBGA324 and Known Good Die (KGD)

You might also like...

All tools & software

    • Part number
      Status
      Description
      Type
      Supplier

      INTEGRITY Real-Time Operating System

      Active

      Safe and Secure Real-Time Operating System.

      Green Hills Software
      INTEGRITY Real-Time Operating System

      Description:

      Safe and Secure Real-Time Operating System.

      u-velOSity Real Time Operating System

      Active

      Real Time Operating System

      Green Hills Software
      u-velOSity Real Time Operating System

      Description:

      Real Time Operating System
    • Part number
      Status
      Description
      Type
      Supplier

      Embedded Office Safety Mentoring

      Active

      Safety Mentoring.

      Engineering Services Embedded Office
      Embedded Office Safety Mentoring

      Description:

      Safety Mentoring.

      Embedded Office Safety Platform

      Active

      Safety Platform.

      Engineering Services Embedded Office
      Embedded Office Safety Platform

      Description:

      Safety Platform.

      Material Mates BMS customer support

      Active

      Help customer to turn BMS reference design into customer product

      Engineering Services Material Mates
      Material Mates BMS customer support

      Description:

      Help customer to turn BMS reference design into customer product
    • Part number
      Status
      Description
      Type
      Supplier

      CYCLONE

      Active

      Automated, Stand-Alone Production Programmer, Debug & Test.

      Hardware Development Tools for SPC5 MCUs P&E Microcomputer Systems
      CYCLONE

      Description:

      Automated, Stand-Alone Production Programmer, Debug & Test.

      CYCLONE FX

      Active

      Automated, Stand-Alone Production Programmer, Debug & Test.

      Hardware Development Tools for SPC5 MCUs P&E Microcomputer Systems
      CYCLONE FX

      Description:

      Automated, Stand-Alone Production Programmer, Debug & Test.

      DCI-GSI2

      Active

      dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming.

      Hardware Development Tools for SPC5 MCUs dSPACE
      DCI-GSI2

      Description:

      dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming.