The STSPIN840 is a compact brushed DC motor driver able to drive two bi-directional brushed DC motors simultaneously. It integrates, in a very small 4 x 4 mm QFN package, both the control logic and a fully protected low RDSon dual full-bridge power stage.
Thanks to a dedicated PARALLEL input pin the parallel mode function can be enabled, transforming the device in an equivalent and more powerful single full-bridge able to deliver up to 3Arms current at an equivalent HS + LS RDSon of 500 mΩ.
The STSPIN840 embeds two independent PWM current controllers (one for each full bridge) based on user settable values of reference voltage and OFF time.
The devices can be forced in a low consumption state reducing the total current consumption down to less than 45 μA.
As with all other devices from the STSPIN family, the STSPIN840 integrates a complete set of protections for the power stages (non-dissipative overcurrent, thermal shutdown, short-circuit and undervoltage lockout) making it a bulletproof solution for the new wave of demanding industrial applications.
|DS12578: Compact dual brushed DC motor driver||1.0||737.22 KB|
|AN5268: Driving high power DC motor by paralleling M0-7 VNHD7xxxAY H-Bridge and M0-7 high-side driver||1.0||467.19 KB|
|An introduction to electric motors||1.0||2.23 MB|
|STSPIN motor drivers||11.2017||1.6 MB|
|Motor Control Reference Guide||15.10||2.61 MB|
|Products and solutions for Smart industry||3.0||2.99 MB|
|STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control||1.0||5.54 MB|
|X-NUCLEO-IHM15A1||ST||Dual brush DC motor driver expansion board based on STSPIN840 for STM32 Nucleo|
The STSPIN220 stepper motor driver, STSPIN230 brushless DC motor driver, STSPIN240 dual brushed DC motor driver and STSPIN250 single brushed DC motor driver are optimized to deliver low noise, minimal power consumption and standby mode of operation along with features such as extreme position accuracy and motion smoothness with up to 256 micro-steps per step.
Get started on your next design with these tools available from ST for STSPIN220, STSPIN230, STSPIN240 and STSPIN250 using the STM32 ODE Nucleo boards and development software.
STSW-SPIN002 evaluation software with
STSW-SPIN002 - Evaluation software with graphical user interface for STSPIN motor driver ICs
The following X-NUCLEO expansion baords X-Cube software support the devices
|Device||X-NUCLEO Board||X-CUBE Software|
X-NUCLEO-IHM06A1 - Low voltage stepper motor driver expansion board based on the STSPIN220 for STM32 Nucleo
X-CUBE-SPN6 - Low voltage stepper motor driver software expansion for STM32Cube
X-NUCLEO-IHM11M1 - Low voltage three-phase brushless DC motor driver expansion board based on STSPIN230 for STM32 Nucleo
X-CUBE-SPN11 - Low voltage three-phase brushless DC motor driver software expansion for STM32Cube
X-NUCLEO-IHM12A1 - Low voltage dual brush DC motor driver expansion board based on STSPIN240 for STM32 Nucleo
X-CUBE-SPN12 - Low voltage dual brush DC motor driver software expansion for STM32Cube
For other STSPIN devices
|Part Number||Marketing Status||Quantity||Unit Price (US$) *||Package||Packing Type||Operating Temperature (°C) (min)||Operating Temperature (°C) (max)||ECCN (US)||Country of Origin||More info||Order from ST||Order from Distributors|
|STSPIN840||Active : Product is in volume production||1000||1.25||TFQFPN 24L 4X4X1.05||Tape And Reel||-40||150||EAR99||PHILIPPINES||MORE INFO||Buy Direct Add to cart||DISTRIBUTOR AVAILABILITY|
|Part Number||Marketing Status||Package||Grade||Marketing Lead Time Qty||Material Declaration**|
|STSPIN840||Active||TFQFPN 24L 4X4X1.05||Industrial||-|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.