车外照明

主要特性

SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
Two push buttons (reset and user)
A potentiometers for ADC input (user)
Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
JTAG interface (2 x 7 male 100mil connector)
USB port (mini -B)
16 MHz crystal
Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector

IMAGE

特色资源

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

85.75

主要特性

Board size 100 x 55 mm
Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
Extension headers for quick connection of M0-7 easy board
Extension headers for quick connection of H-Bridge easy board
Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

IMAGE

特色资源

Adapter board

32.12

EV-VN7016AJ

主要特性

Simple single IC application board dedicated for VN7016AJ-E
Provides electrical connectivity and thermal heat-sinking for easy prototyping
General device features
- Single channel smart high-side driver with MultiSense analog feedback
- Very low standby current
- Compatible with 3 V and 5 V CMOS outputs
MultiSense diagnostic functions
- Multiplexed analog feedback of: load current with high precision proportional current mirror, V_CC supply voltage and T_CHIP device temperature
- Overload and short to ground (power limitation) indication
- Thermal shutdown indication
- OFF-state open-load detection
- Output short to V_CC detection
- Sense enable/disable
Protections
- Undervoltage shutdown
- Overvoltage clamp
- Load current limitation
- Self limiting of fast thermal transients
- Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
- Loss of ground and loss of V_CC
- Reverse battery with external components
- Electrostatic discharge protection

VN7016AJ Evaluation Board

VN7016AJTR

3.92

主要特性

Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-SPC5EV-ADIS	1.0.0	Active	ST	获取软件

Description:

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

价格 (US$)*

85.75

Description:

Adapter board

价格 (US$)*

32.12

EV-VN7016AJ

Description:

VN7016AJ Evaluation Board

价格 (US$)*

3.92

Description:

SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

价格 (US$)*

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-SPC5EV-ADIS	1.0.0	Active	ST	获取软件

Combining the VIP-M07-ADIS (12V expansion board based on 1x VND7020AJ + 2x VND7012AY + 1xVNQ7050AJ) with the SPC560B-DIS Discovery board, the user can evaluate how to drive a complete car front lighting system by using M0-7 VIPower devices.

VND7020AJ, VND7012AY and VNQ7050AJ are designed to drive 12V automotive grounded loads through a 3V and 5V CMOS-compatible interface, providing advanced protection and diagnostics.

解决方案组件

产品型号

描述

状态

核心产品

价格 (US$)*

订购 / 下载

VIP-M07-ADIS

主要特性

4 soldered M0-7 high side drivers:
- 1 VND7020AJ
- 2 VND7012AY
- 1 VNQ7050AJ
Board size 100 x 55 mm
Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
Free ready to run application firmware availabe on www.st.com, to support quick evaluation and development

IMAGE

特色资源

M0-7 DISCOVERY

51.09

主要特性

SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
Two push buttons (reset and user)
A potentiometers for ADC input (user)
Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
JTAG interface (2 x 7 male 100mil connector)
USB port (mini -B)
16 MHz crystal
Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector

IMAGE

特色资源

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

85.75

STSW-M07-ADIS

主要特性

Complete Graphical User Interface (GUI) for VIP-M07-ADIS discovery board.

VIP-M07-ADIS Graphical User Interface

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-M07-ADIS	1.0.0	Active	ST	获取软件

VIP-M07-ADIS

Description:

M0-7 DISCOVERY

价格 (US$)*

51.09

Description:

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

价格 (US$)*

85.75

STSW-M07-ADIS

Description:

VIP-M07-ADIS Graphical User Interface

价格 (US$)*

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-M07-ADIS	1.0.0	Active	ST	获取软件

A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

解决方案组件

产品型号

描述

状态

核心产品

价格 (US$)*

订购 / 下载

主要特性

SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
Two push buttons (reset and user)
A potentiometers for ADC input (user)
Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
JTAG interface (2 x 7 male 100mil connector)
USB port (mini -B)
16 MHz crystal
Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector

IMAGE

特色资源

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

85.75

主要特性

Board size 100 x 55 mm
Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
Extension headers for quick connection of M0-7 easy board
Extension headers for quick connection of H-Bridge easy board
Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

IMAGE

特色资源

Adapter board

32.12

EV-VN7140AJ

主要特性

Simple single IC application board dedicated for VN7140AJ-E
Provides electrical connectivity and thermal heat-sinking for easy prototyping
General device features
- Single channel smart high-side driver with MultiSense analog feedback
- Very low standby current
- Compatible with 3 V and 5 V CMOS outputs
MultiSense diagnostic functions
- Multiplexed analog feedback of: load current with high precision proportional current mirror, V_CC supply voltage and T_CHIP device temperature
- Overload and short to ground (power limitation) indication
- Thermal shutdown indication
- OFF-state open-load detection
- Output short to V_CC detection
- Sense enable/disable
Protections
- Undervoltage shutdown
- Overvoltage clamp
- Load current limitation
- Self limiting of fast thermal transients
- Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
- Loss of ground and loss of V_CC
- Reverse battery with external components
- Electrostatic discharge protection

VN7140AJ evaluation board

VN7140AJTR

3.92

主要特性

Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-SPC5EV-ADIS	1.0.0	Active	ST	获取软件

Description:

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

价格 (US$)*

85.75

Description:

Adapter board

价格 (US$)*

32.12

EV-VN7140AJ

Description:

VN7140AJ evaluation board

价格 (US$)*

3.92

Description:

SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

价格 (US$)*

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-SPC5EV-ADIS	1.0.0	Active	ST	获取软件

A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

解决方案组件

产品型号

描述

状态

核心产品

价格 (US$)*

订购 / 下载

主要特性

SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
Two push buttons (reset and user)
A potentiometers for ADC input (user)
Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
JTAG interface (2 x 7 male 100mil connector)
USB port (mini -B)
16 MHz crystal
Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector

IMAGE

特色资源

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

85.75

主要特性

Board size 100 x 55 mm
Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
Extension headers for quick connection of M0-7 easy board
Extension headers for quick connection of H-Bridge easy board
Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

IMAGE

特色资源

Adapter board

32.12

EV-VN7040AJ

主要特性

Simple single IC application board dedicated for VN7040AJ-E
Provides electrical connectivity and thermal heat-sinking for easy prototyping
General device features
- Single channel smart high-side driver with MultiSense analog feedback
- Very low standby current
- Compatible with 3 V and 5 V CMOS outputs
MultiSense diagnostic functions
- Multiplexed analog feedback of: load current with high precision proportional current mirror, V_CC supply voltage and T_CHIP device temperature
- Overload and short to ground (power limitation) indication
- Thermal shutdown indication
- OFF-state open-load detection
- Output short to V_CC detection
- Sense enable/disable
Protections
- Undervoltage shutdown
- Overvoltage clamp
- Load current limitation
- Self limiting of fast thermal transients
- Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
- Loss of ground and loss of V_CC
- Reverse battery with external components
- Electrostatic discharge protection

VN7040AJ evaluation board

VN7040AJTR

4.12

主要特性

Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-SPC5EV-ADIS	1.0.0	Active	ST	获取软件

Description:

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

价格 (US$)*

85.75

Description:

Adapter board

价格 (US$)*

32.12

EV-VN7040AJ

Description:

VN7040AJ evaluation board

价格 (US$)*

4.12

Description:

SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

价格 (US$)*

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-SPC5EV-ADIS	1.0.0	Active	ST	获取软件

A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

解决方案组件

产品型号

描述

状态

核心产品

价格 (US$)*

订购 / 下载

主要特性

SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
Two push buttons (reset and user)
A potentiometers for ADC input (user)
Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
JTAG interface (2 x 7 male 100mil connector)
USB port (mini -B)
16 MHz crystal
Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector

IMAGE

特色资源

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

85.75

主要特性

Board size 100 x 55 mm
Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
Extension headers for quick connection of M0-7 easy board
Extension headers for quick connection of H-Bridge easy board
Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

IMAGE

特色资源

Adapter board

32.12

EV-VN7010AJ

主要特性

Simple single IC application board dedicated for VN7010AJ
Provides electrical connectivity and thermal heat-sinking for easy prototyping
General device features
- Single channel smart high-side driver with MultiSense analog feedback
- Very low standby current
- Compatible with 3 V and 5 V CMOS outputs
Diagnostic functions
- Multiplexed analog feedback of: load current with high precision proportional current mirror, V_CC supply voltage and T_CHIP device temperature
- Overload and short to ground (power limitation) indication
- Thermal shutdown indication
- OFF-state open-load detection
- Output short to V_CC detection
- Sense enable/disable
Protections
- Undervoltage shutdown
- Overvoltage clamp
- Load current limitation
- Self limiting of fast thermal transients
- Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
- Loss of ground and loss of V_CC
- Reverse battery with external components
- Electrostatic discharge protection

VN7010AJ Evaluation Board

VN7010AJTR

4.12

主要特性

Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-SPC5EV-ADIS	1.0.0	Active	ST	获取软件

Description:

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

价格 (US$)*

85.75

Description:

Adapter board

价格 (US$)*

32.12

EV-VN7010AJ

Description:

VN7010AJ Evaluation Board

价格 (US$)*

4.12

Description:

SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

价格 (US$)*

软件

产品型号	Software Version	供货状态	供应商	下载
STSW-SPC5EV-ADIS	1.0.0	Active	ST	获取软件

00 选择要下载的文档

技术文档

应用手册

描述	版本	文档大小	操作
AN4434 CMOS F8H automotive EEPROM cycling endurance and data retention	4.0	367.97 KB	PDF
AN2440 Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines	5.0	356.4 KB	PDF
AN4218 Hardware design guideline power supply and voltage measurement	3.0	1.4 MB	PDF
AN3399 L99PM62GXP external voltage regulation with bipolar transistor	2.2	887.57 KB	PDF
AN2689 Protection of automotive electronics from electrical hazards, guidelines for design and component selection	3.1	797.51 KB	PDF
AN5026 VIPower M0-7 H-Bridges for Automotive DC Motor Control	2.0	18.77 MB	PDF
AN1596 VIPower: high side drivers for automotive	3.2	300.61 KB	PDF

AN4434

CMOS F8H automotive EEPROM cycling endurance and data retention

AN2440

Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines

AN4218

Hardware design guideline power supply and voltage measurement

AN3399

L99PM62GXP external voltage regulation with bipolar transistor

AN2689

Protection of automotive electronics from electrical hazards, guidelines for design and component selection

AN5026

VIPower M0-7 H-Bridges for Automotive DC Motor Control

AN1596

VIPower: high side drivers for automotive

技术文档
- 描述版本文档大小操作
  
  TN0897
  ST SPI protocol 2.3
  421.19 KB
  PDF
  
  TN0897
  
  ST SPI protocol
  
  PDF
用户手册
- 描述版本文档大小操作
  
  UM1922
  VIPower® M0-7 standard high-side drivers hardware design guide 2.0
  10.08 MB
  PDF
  
  UM1922
  
  VIPower® M0-7 standard high-side drivers hardware design guide
  
  PDF

	描述	版本	文档大小	操作
	TN0897 ST SPI protocol	2.3	421.19 KB	PDF

	描述	版本	文档大小	操作
	UM1922 VIPower® M0-7 standard high-side drivers hardware design guide	2.0	10.08 MB	PDF

出版刊物和宣传资料

宣传册

描述	版本	文档大小	操作
Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits	1.0	718.85 KB	PDF
New fully integrated, reliable and compact drivers for DC motors		1.22 MB	PDF
VIPower Zero series - Innovative smart power switches for high-current applications	1.0	291.96 KB	PDF

Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

New fully integrated, reliable and compact drivers for DC motors

VIPower Zero series - Innovative smart power switches for high-current applications

选型指南

描述	版本	文档大小	操作
Automotive-grade protection devices and rectifiers	1.0	825.43 KB	PDF
EEPROM Advanced Automotive selection guide	1.0	709.5 KB	PDF
Power amplifiers and voltage regulators		750.29 KB	PDF
Smart power solutions for car body applications	4.0	3.38 MB	PDF

Automotive-grade protection devices and rectifiers

EEPROM Advanced Automotive selection guide

Power amplifiers and voltage regulators

Smart power solutions for car body applications