NFC 无钥匙进入

主要特性

• Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
• The kit includes
  • 10 samples

Show More

主要特性

• Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
• 2 Ethernet ports
• 1 CAN FD port (DB9 connector)
• JTAG interface (14 pin - 2x7 connector)
• 2 Push buttons, 4 LEDs for user purposes, reset push button
• Board Supply: 12 VDC (external power supply)
• Connector suitable for TFT LCD module
• Board size 145 x 105 mm

Show More

主要特性

• SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
• Integrated programmer - debugger.
• JTAG interface (Standard 7x2 male 100mil).
• 2 ISO CAN FD port (DB9 connector).
• 1 Ethernet port.
• 1 FlexRay, 1 LIN (with transceiver).
• 1 USB virtual COM Port.
• Connectors Arduino UNO R3-compatible.
• 3 Push buttons, 3 LEDs for user purpose.
• 2 potentiometers for ADC quick evaluation.
• Reset push button.
• All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
• 12MHz crystal.
• Board Supply: 12 VDC (external power
• supply).
• Board size 150 x 101 mm.

Show More

主要特性

• SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture^® Technology CPU, 1MB Code Flash in eQFP64 package.
• On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
• USB Virtual Communication port.
• Two types of extension resources:
  • Arduino Uno Revision 3 connectivity
  • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
• Flexible board power supply:
  • USB port (mini B - 5V)
  • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
• Two push buttons: USER and RESET
• Eight LEDs
  • 3 Integrated Programmer/Debugger
  • 3 LEDs User
  • 1 Reset
  • 1 Power LED: +5V
• 40MHz Crystal

Show More

主要特性

• DC-DC1 working at 1.2 V, 2 MHz
• DC-DC2 working at 5 V, 250 kHz
• Input connector to sync a different working frequency up to 2MHz
• Oscillator on board to change working frequency up to 2MHz
• DC-DC1 and DC-DC2 working up to 3A
• LDO working at 3.3 V, 250 mA
• Possibility to change output voltages
• Jumpers to enable or disable DC-DC
• Jumpers to enable or disable LDO
• Pins to independently supply DC-DC1 and DC-DC2 together with LDO
• Output connectors to check output voltages

Show More

主要特性

• Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
  • ISO 18092 (NFCIP-1) active P2P
  • ISO14443A, ISO14443B and FeliCa™
  • ISO15693
  • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended mode
  • Inductive and capacitive Wake-up
  • Automatic antenna tuning system
  • DPO (Dynamic Power Output)
  • User selectable and automatic gain control
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • 6 Mbit/s SPI
  • Wide supply voltage range (from 2.4 V to 5.5 V)
  • QFN32, 5 mm x 5 mm package
• STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
• 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
• Micro-USB connector for communication with the host PC and board powering
• Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

主要特性

• Input voltage 5 V
• 12 V output, step-up converter for transceiver supply voltage
• LIN transceiver
• CAN transceiver
• Automotive-grade ESD protection
• IEC61000-4-2 compatibility

Show More

主要特性

• DC-DC1 working at 1.2 V, 2 MHz
• DC-DC2 working at 5 V, 250 kHz
• Input connector to sync a different working frequency up to 2MHz
• Oscillator on board to change working frequency up to 2MHz
• DC-DC1 and DC-DC2 working up to 3A
• LDO working at 3.3 V, 250 mA
• Possibility to change output voltages
• Jumpers to enable or disable DC-DC
• Jumpers to enable or disable LDO
• Pins to independently supply DC-DC1 and DC-DC2 together with LDO
• Output connectors to check output voltages

Show More

主要特性

• Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
• Supports SPC5x MCUs
• Supports Multicore, eTPU and GTM debugging
• Includes FLASH programming capability
• Support service provided through STMicroelectronics

Show More