概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

即便是汽车座椅也亟待创新:高级车型中配备了极其复杂的机械和电子系统,确保驾驶员和乘客的舒适度。

座椅控制系统可以对座椅位置多个角度、自由度进行调节,例如靠背角度、座椅高度或前后等,也可以使用专用冷却/加热设备调节座椅温度。对座椅的调整信息均可以存储和读取。

难点在于如何确保用于微调座椅的所有负载(包括一系列电机)都能得到有效可靠的驱动和控制。

我们的高边驱动器系列具有低电阻、全保护的特点,提供多种组合,包括用于电机的H桥驱动、SPC5 32位汽车微控制器、电源管理IC和系统基础芯片(SBC),可帮助设计有效的座椅控制解决方案。

    • Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.

      A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

      Solution Components
      产品型号 描述 状态 Core Products Price (US$)*
      Order / Download
      Buy All
      SPC56B-Discovery

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
      Active
      85.75 立即购买
      SPC5-EV-ADIS

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      Adapter board
      Active
      32.12 立即购买
      EV-VN7003AH

      Key features

      • Simple single IC application board dedicated for VN7003AH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
        • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
        • Sense enable/ disable
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      VN7003AH Evaluation Board
      Active
      VN7003AHTR 4.12 立即购买
      STSW-SPC5EV-ADIS

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers
      Active
      -
      软件
      产品型号 Software Version 供货状态 供应商 下载
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      SPC56B-Discovery

      描述 :

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

      Price (US$)*

      85.75

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      SPC5-EV-ADIS

      描述 :

      Adapter board

      Price (US$)*

      32.12

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      EV-VN7003AH

      描述 :

      VN7003AH Evaluation Board

      Price (US$)*

      4.12

      Key features

      • Simple single IC application board dedicated for VN7003AH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
        • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
        • Sense enable/ disable
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      STSW-SPC5EV-ADIS

      描述 :

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Price (US$)*

      -
      软件

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      产品型号 Software Version 供货状态 供应商 下载
      STSW-SPC5EV-ADIS 1.0.0 Active ST

产品型号
描述
STEVAL-MKI110V1 AIS328DQ adapter board for standard DIL24 socket Quick view

主要特性

  • Complete AIS328DQ pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

图片

Image
Image
STEVAL-MKI109V2 eMotion: ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards Quick view

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F103RET6 high-performance ARM Cortex -M3 microcontroller
  • Includes a DIL24 socket for easy MEMS adapter connection
  • 3 V on-board linear voltage regulator
  • DFU compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Debugging connector for SWD/JTAG
  • RoHS compliant

Show More

SAMPLES-AUTOPMIC Automotive Voltage Regulators & System Basis Chip Evaluation Tool Quick view

主要特性

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

EV-VNH7040AY VNH7040AY Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VNH7040AY
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

SPC58NG-DISP Discovery Kit for SPC58NG - G line Quick view

主要特性

  • Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
  • 2 Ethernet ports
  • 1 CAN FD port (DB9 connector)
  • JTAG interface (14 pin - 2x7 connector)
  • 2 Push buttons, 4 LEDs for user purposes, reset push button
  • Board Supply: 12 VDC (external power supply)
  • Connector suitable for TFT LCD module
  • Board size 145 x 105 mm

Show More

SPC58EC-DISP Discovery Kit for SPC58EC - C line Quick view

主要特性

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

Show More

SPC582B-DIS Discovery Kit for SPC582 B line Quick view

主要特性

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

Show More

EV-VN7003AH VN7003AH Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7003AH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

STEVAL-MKI109V3 Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters Quick view

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

STEVAL-OET003V1 Evaluation board for automotive-grade ESD protection Quick view

主要特性

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

SPC5-EV-ADIS Adapter board Quick view

主要特性

  • Board size 100 x 55 mm
  • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
  • Extension headers for quick connection of M0-7 easy board
  • Extension headers for quick connection of H-Bridge easy board
  • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
  • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

Show More

VIP-M07-ADIS M0-7 DISCOVERY Quick view

主要特性

  • 4 soldered M0-7 high side drivers:
    • 1 VND7020AJ
    • 2 VND7012AY
    • 1 VNQ7050AJ
  • Board size 100 x 55 mm
  • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
  • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
  • Free ready to run application firmware availabe on www.st.com, to support quick evaluation and development

Show More

EV-VNH7070AS VNH7070AS Evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VNH7070AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

SAMPLEKITM0-7 Evaluation sample box Quick view

主要特性

  • Immediate evaluation of M0-7 devices with demonstration examples
  • The kit includes:
    • 10 samples
    • Printed card providing overview of product portfolio, key features, main applications, package description.

Show More

STEVAL-MKI158V1 AIS3624DQ adapter board for a standard DIL24 socket Quick view

主要特性

  • Complete AIS3624DQ pin-out for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

SPC57S-Discovery Discovery Kit for SPC57 S line - with SPC570S50E1 MCU Quick view

主要特性

  • The SPC570S50Ex 32-bit CPU implements two e200z0h processor cores:
    • Core_0 - Main core (80MHz)
    • Core_0s – Checker (safety)
  • On-board USB-JTAG PLS debugger and HW selection mode to use it or a third party JTAG debuggers.
  • 256 kByte code size limited debugging free of charge evaluation license included.
  • Board power supply through the USB bus (5 V supply voltage) or external +12 V PSU.
  • User push buttons and LEDs
  • Reset button
  • 2 potentiometers for ADC evaluation
  • Extension headers (4x37 pin - 100 mil) for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • JTAG interface (2x7 male 100mil)
  • USB port (mini - B)
  • 40 MHz crystal
  • Board size 105 x 150mm

Show More

图片

Image
Image
SPC56P-Discovery Discovery Kit for SPC56 P line - with SPC560P50L5 MCU Quick view

主要特性

  • SPC560P50L5 32-bit 64MHz e200z0h CPU;32-bit Power Architecture® Technology CPU, 576 KB Flash in an LQFP144 package.
  • Shield Connectors (Arduinocompatible).
  • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers (2 x 7 male 100mil connector).
  • Free 128 Kbyte code size limited debugging
  • Board power supply: from the USB bus (5 V supply voltage) or through external +12 V PSU.
  • All GPIOs and DSPI/USB signals accessible by a 4x37 100mil pin grid array allowing connection of an additional boards for dedicated applications.
  • CAN, K-LINE, LIN, FlexRay interfaces.
  • Main power switch.
  • Reset push button.
  • 2 potentiometers for ADC evaluation
  • 12 MHz crystal.
  • Board size 152 x 103 mm

Show More

图片

Image
Image

特色资源

Gerber
STEVAL-MKI125V1 A3G4250D adapter board for standard DIL 24 socket Quick view

主要特性

  • Complete A3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal Quick view

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

SPC56L-Discovery Discovery Plus Kit for SPC56 L line - with SPC56EL70L5 MCU Quick view

主要特性

  • Board Supply: Single 12 VDC external power supply input. Two regulators provide power voltages 5 V and 3.3 V.
  • Main power switch and three power supply status LEDs (+12 V, +5 V and +3.3 V)
  • All MCU signals accessible by a 37 x 4 100 mil pin grid array allowing connection of an additional board for dedicated applications.
  • JTAG interface (7 x 2 male 100 mil connector)
  • Two FlexRay channels with jumper enable and DB9 male connector.
  • Two CAN channels with jumper enable and DB9 male connector
  • K-Line interface.
  • Two LIN interfaces (HW configurable)
  • Two potentiometers for analog voltage input
  • Three user LEDs.
  • 40 MHz crystal.
  • Reset push button.
  • Specification:
    • Board size 115 x 135mm
    • 12 VDC center positive, 2.1 mm inner diameter.

Show More

SPC56D-Discovery Discovery Kit for SPC56 D line - with SPC56D40L1 MCU Quick view

主要特性

  • SPC560D40L1 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 256 kB Code Flash in an LQFP64 package.
  • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
  • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
  • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs (for user)
  • Two push buttons (reset and user)
  • A potentiometers for ADC input (user)
  • Two extension headers (2 x 36 pin - 100 mil) for all LQFP64 pins and for quick connection to prototyping boards, additional modules and easy probing.
  • JTAG interface (2 x 7 male 100 mil connector)
  • USB port (mini -B)
  • 16 MHz crystal
  • Specification:
  • Board size 100 x 65 mm
  • MCU: SPC560D40L1 - LQFP64
  • 2 extension headers 2 x 36 pin - 100 mil
  • DC connector (+12 V input)
  • Mini USB - B
  • JTAG 2 x 7 - 100 mil connector

Show More

SPC56B-Discovery Discovery Kit for SPC56 B line - with SPC560B54L5 MCU Quick view

主要特性

  • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
  • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
  • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
  • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
  • Two push buttons (reset and user)
  • A potentiometers for ADC input (user)
  • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
  • JTAG interface (2 x 7 male 100mil connector)
  • USB port (mini -B)
  • 16 MHz crystal
  • Specification:
    • Board size 100 x 65 mm
    • MCU: SPC560B54L5 - LQFP144
    • 2 extension headers 2 x 36 pin - 100 mil
    • DC connector (+12 V input)
    • Mini USB - B
    • JTAG 2 x 7 - 100 mil connector

Show More

产品型号
STEVAL-MKI110V1

AIS328DQ adapter board for standard DIL24 socket

主要特性

  • Complete AIS328DQ pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

图片

Image
Image
STEVAL-MKI109V2

eMotion: ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F103RET6 high-performance ARM Cortex -M3 microcontroller
  • Includes a DIL24 socket for easy MEMS adapter connection
  • 3 V on-board linear voltage regulator
  • DFU compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Debugging connector for SWD/JTAG
  • RoHS compliant

Show More

SAMPLES-AUTOPMIC

Automotive Voltage Regulators & System Basis Chip Evaluation Tool

主要特性

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

EV-VNH7040AY

VNH7040AY Evaluation Board

主要特性

  • Simple single IC application board dedicated for VNH7040AY
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

SPC58NG-DISP

Discovery Kit for SPC58NG - G line

主要特性

  • Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
  • 2 Ethernet ports
  • 1 CAN FD port (DB9 connector)
  • JTAG interface (14 pin - 2x7 connector)
  • 2 Push buttons, 4 LEDs for user purposes, reset push button
  • Board Supply: 12 VDC (external power supply)
  • Connector suitable for TFT LCD module
  • Board size 145 x 105 mm

Show More

SPC58EC-DISP

Discovery Kit for SPC58EC - C line

主要特性

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

Show More

SPC582B-DIS

Discovery Kit for SPC582 B line

主要特性

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

Show More

EV-VN7003AH

VN7003AH Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7003AH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

STEVAL-MKI109V3

Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

STEVAL-OET003V1

Evaluation board for automotive-grade ESD protection

主要特性

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

主要特性

  • Board size 100 x 55 mm
  • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
  • Extension headers for quick connection of M0-7 easy board
  • Extension headers for quick connection of H-Bridge easy board
  • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
  • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

Show More

VIP-M07-ADIS

M0-7 DISCOVERY

主要特性

  • 4 soldered M0-7 high side drivers:
    • 1 VND7020AJ
    • 2 VND7012AY
    • 1 VNQ7050AJ
  • Board size 100 x 55 mm
  • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
  • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
  • Free ready to run application firmware availabe on www.st.com, to support quick evaluation and development

Show More

EV-VNH7070AS

VNH7070AS Evaluation board

主要特性

  • Simple single IC application board dedicated for VNH7070AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

SAMPLEKITM0-7

Evaluation sample box

主要特性

  • Immediate evaluation of M0-7 devices with demonstration examples
  • The kit includes:
    • 10 samples
    • Printed card providing overview of product portfolio, key features, main applications, package description.

Show More

STEVAL-MKI158V1

AIS3624DQ adapter board for a standard DIL24 socket

主要特性

  • Complete AIS3624DQ pin-out for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

SPC57S-Discovery

Discovery Kit for SPC57 S line - with SPC570S50E1 MCU

主要特性

  • The SPC570S50Ex 32-bit CPU implements two e200z0h processor cores:
    • Core_0 - Main core (80MHz)
    • Core_0s – Checker (safety)
  • On-board USB-JTAG PLS debugger and HW selection mode to use it or a third party JTAG debuggers.
  • 256 kByte code size limited debugging free of charge evaluation license included.
  • Board power supply through the USB bus (5 V supply voltage) or external +12 V PSU.
  • User push buttons and LEDs
  • Reset button
  • 2 potentiometers for ADC evaluation
  • Extension headers (4x37 pin - 100 mil) for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • JTAG interface (2x7 male 100mil)
  • USB port (mini - B)
  • 40 MHz crystal
  • Board size 105 x 150mm

Show More

图片

Image
Image
SPC56P-Discovery

Discovery Kit for SPC56 P line - with SPC560P50L5 MCU

主要特性

  • SPC560P50L5 32-bit 64MHz e200z0h CPU;32-bit Power Architecture® Technology CPU, 576 KB Flash in an LQFP144 package.
  • Shield Connectors (Arduinocompatible).
  • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers (2 x 7 male 100mil connector).
  • Free 128 Kbyte code size limited debugging
  • Board power supply: from the USB bus (5 V supply voltage) or through external +12 V PSU.
  • All GPIOs and DSPI/USB signals accessible by a 4x37 100mil pin grid array allowing connection of an additional boards for dedicated applications.
  • CAN, K-LINE, LIN, FlexRay interfaces.
  • Main power switch.
  • Reset push button.
  • 2 potentiometers for ADC evaluation
  • 12 MHz crystal.
  • Board size 152 x 103 mm

Show More

图片

Image
Image

特色资源

Gerber
STEVAL-MKI125V1

A3G4250D adapter board for standard DIL 24 socket

主要特性

  • Complete A3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

SPC56L-Discovery

Discovery Plus Kit for SPC56 L line - with SPC56EL70L5 MCU

主要特性

  • Board Supply: Single 12 VDC external power supply input. Two regulators provide power voltages 5 V and 3.3 V.
  • Main power switch and three power supply status LEDs (+12 V, +5 V and +3.3 V)
  • All MCU signals accessible by a 37 x 4 100 mil pin grid array allowing connection of an additional board for dedicated applications.
  • JTAG interface (7 x 2 male 100 mil connector)
  • Two FlexRay channels with jumper enable and DB9 male connector.
  • Two CAN channels with jumper enable and DB9 male connector
  • K-Line interface.
  • Two LIN interfaces (HW configurable)
  • Two potentiometers for analog voltage input
  • Three user LEDs.
  • 40 MHz crystal.
  • Reset push button.
  • Specification:
    • Board size 115 x 135mm
    • 12 VDC center positive, 2.1 mm inner diameter.

Show More

SPC56D-Discovery

Discovery Kit for SPC56 D line - with SPC56D40L1 MCU

主要特性

  • SPC560D40L1 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 256 kB Code Flash in an LQFP64 package.
  • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
  • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
  • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs (for user)
  • Two push buttons (reset and user)
  • A potentiometers for ADC input (user)
  • Two extension headers (2 x 36 pin - 100 mil) for all LQFP64 pins and for quick connection to prototyping boards, additional modules and easy probing.
  • JTAG interface (2 x 7 male 100 mil connector)
  • USB port (mini -B)
  • 16 MHz crystal
  • Specification:
  • Board size 100 x 65 mm
  • MCU: SPC560D40L1 - LQFP64
  • 2 extension headers 2 x 36 pin - 100 mil
  • DC connector (+12 V input)
  • Mini USB - B
  • JTAG 2 x 7 - 100 mil connector

Show More

SPC56B-Discovery

Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

主要特性

  • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
  • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
  • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
  • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
  • Two push buttons (reset and user)
  • A potentiometers for ADC input (user)
  • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
  • JTAG interface (2 x 7 male 100mil connector)
  • USB port (mini -B)
  • 16 MHz crystal
  • Specification:
    • Board size 100 x 65 mm
    • MCU: SPC560B54L5 - LQFP144
    • 2 extension headers 2 x 36 pin - 100 mil
    • DC connector (+12 V input)
    • Mini USB - B
    • JTAG 2 x 7 - 100 mil connector

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN5092
      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications
      2.0
      521.09 KB
      PDF
      AN4434
      CMOS F8H automotive EEPROM cycling endurance and data retention
      4.0
      367.97 KB
      PDF
      AN2440
      Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines
      5.0
      356.4 KB
      PDF
      AN4218
      Hardware design guideline power supply and voltage measurement
      3.0
      1.4 MB
      PDF
      AN4102
      Introducing the low-power concept in automotive applications using the STM8AL board of the STM8A-DISCOVERY
      1.2
      168.53 KB
      PDF
      AN3399
      L99PM62GXP external voltage regulation with bipolar transistor
      2.1
      887.19 KB
      PDF
      AN4178
      LIN communication with two STM8AF boards of STM8A-DISCOVERY
      1.3
      102.9 KB
      PDF
      AN2689
      Protection of automotive electronics from electrical hazards, guidelines for design and component selection
      3.1
      797.51 KB
      PDF
      AN3258
      STM8AF and STM8S series HSI oscillator calibration using LIN automatic resynchronization
      2.0
      247.91 KB
      PDF
      AN5026
      VIPower M0-7 H-Bridges for Automotive DC Motor Control
      2.0
      18.77 MB
      PDF
      AN1596
      VIPower: high side drivers for automotive
      3.2
      300.61 KB
      PDF
      AN1471
      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?
      4.4
      72.36 KB
      PDF
      AN5092

      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications

      AN4434

      CMOS F8H automotive EEPROM cycling endurance and data retention

      AN2440

      Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines

      AN4218

      Hardware design guideline power supply and voltage measurement

      AN4102

      Introducing the low-power concept in automotive applications using the STM8AL board of the STM8A-DISCOVERY

      AN3399

      L99PM62GXP external voltage regulation with bipolar transistor

      AN4178

      LIN communication with two STM8AF boards of STM8A-DISCOVERY

      AN2689

      Protection of automotive electronics from electrical hazards, guidelines for design and component selection

      AN3258

      STM8AF and STM8S series HSI oscillator calibration using LIN automatic resynchronization

      AN5026

      VIPower M0-7 H-Bridges for Automotive DC Motor Control

      AN1596

      VIPower: high side drivers for automotive

      AN1471

      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?

    • 描述 版本 文档大小 操作
      TN0897
      ST SPI protocol
      2.2
      420.96 KB
      PDF
      TN0018
      LGA 封装中MEMS 传感器的表面贴装指南
      1.0
      251.2 KB
      PDF
      TN0897

      ST SPI protocol

      TN0018

      LGA 封装中MEMS 传感器的表面贴装指南

    • 描述 版本 文档大小 操作
      UM1922
      VIPower® M0-7 standard high-side drivers hardware design guide
      2.0
      10.08 MB
      PDF
      UM1922

      VIPower® M0-7 standard high-side drivers hardware design guide

演示和培训资料

    • 描述 版本 文档大小 操作
      EEPROM Advanced Automotive products 1.0
      671.53 KB
      PDF

      EEPROM Advanced Automotive products

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      A798x, A597x switching regulators for car power management 1.0
      714.2 KB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.0
      718.85 KB
      PDF
      MEMS automotive sensors - Making our cars safer and more comfortable 1.0
      773.66 KB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      STM8A-SafeASIL - Safety design package for STM8AF MCUs 17.12
      472.94 KB
      PDF
      STM8CubeMX eases STM8 configuration 19.01
      1.21 MB
      PDF

      A798x, A597x switching regulators for car power management

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      MEMS automotive sensors - Making our cars safer and more comfortable

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      STM8A-SafeASIL - Safety design package for STM8AF MCUs

      STM8CubeMX eases STM8 configuration

    • 描述 版本 文档大小 操作
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF
      EEPROM Advanced Automotive selection guide 1.0
      709.5 KB
      PDF
      Power amplifiers and voltage regulators
      750.29 KB
      PDF
      Smart power solutions for car body applications 4.0
      3.38 MB
      PDF

      Automotive-grade protection devices and rectifiers

      EEPROM Advanced Automotive selection guide

      Power amplifiers and voltage regulators

      Smart power solutions for car body applications

    • 描述 版本 文档大小 操作
      All you need to drive SPC56 32-bit power architecture MCUs 1.0
      1.42 MB
      PDF
      Driving smart power in automotive 1.0
      1.24 MB
      PDF
      NFC solutions from ST 1.0
      5.1 MB
      PDF
      SPC58 C-line 1.0
      933.22 KB
      PDF
      STM8 8-bit MCU family 18.10
      3.47 MB
      PDF
      VIPower M0-7 - Miniaturized high-side driver family 1.0
      2.07 MB
      PDF
      VIPower™ M0-7 family H-bridges for DC motor control 1.0
      1.25 MB
      PDF

      All you need to drive SPC56 32-bit power architecture MCUs

      Driving smart power in automotive

      NFC solutions from ST

      SPC58 C-line

      STM8 8-bit MCU family

      VIPower M0-7 - Miniaturized high-side driver family

      VIPower™ M0-7 family H-bridges for DC motor control

开发工具硬件

    • 产品型号

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

      VIPower smart product finder application for Android and iOS

软件

    • 产品型号

      VIP-M07-ADIS Graphical User Interface

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Dynamic Electro-Thermal simulator for devices in VIPower technology

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

二极管(功率肖特基和场效应整流)产品选择器

TVS产品选择器

Automotive Analog and Power

产品型号 描述
L9966 FlexInput IC for automotive applications
L99PM62GXP Power Management IC with LIN and high speed CAN
L99PM72GXP Advanced power management system IC with embedded LIN and high speed CAN transceiver supporting CAN Partial Networking
VN7003AH High-side driver with Current Sense analog feedback for automotive applications
VNH7040AY Automotive fully integrated H-bridge motor driver
VNH7070BAS Automotive fully integrated H-bridge motor driver
VNHD7008AY H-bridge motor driver for automotive DC motor driving
产品型号
FlexInput IC for automotive applications
Power Management IC with LIN and high speed CAN
Advanced power management system IC with embedded LIN and high speed CAN transceiver supporting CAN Partial Networking
High-side driver with Current Sense analog feedback for automotive applications
Automotive fully integrated H-bridge motor driver
Automotive fully integrated H-bridge motor driver
H-bridge motor driver for automotive DC motor driving

Automotive Microcontrollers

产品型号 描述
SPC560P60L5 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications
SPC56EL70L5 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications
SPC570S50E3 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications
产品型号
32-bit Power Architecture MCU for Automotive Chassis and Safety Applications
32-bit Power Architecture MCU for Automotive Chassis and Safety Applications
32-bit Power Architecture MCU for Automotive Chassis and Safety Applications

MEMS and Sensors

产品型号 描述
AIS328DQ Automotive 3-axis accelerometer, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
HTS221 Capacitive digital sensor for relative humidity and temperature
LPS22HB Ultra-compact piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold, holed LGA package (HLGA)
LPS22HD Piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, small and thin package
LPS22HH MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer
STLM20 Analog temperature sensor, ultra-low current 2.4 V, high precision
STTS751 2.25 V low-voltage local digital temperature sensor
产品型号
Automotive 3-axis accelerometer, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
Capacitive digital sensor for relative humidity and temperature
Ultra-compact piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold, holed LGA package (HLGA)
Piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, small and thin package
MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer
Analog temperature sensor, ultra-low current 2.4 V, high precision
2.25 V low-voltage local digital temperature sensor

NFC

产品型号 描述
ST25DV16K 16-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting
产品型号
16-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting

Protection Devices

产品型号 描述
ESDAXLC6-1BT2Y Automotive single-line bidirectional ESD protection for high speed interface
产品型号
Automotive single-line bidirectional ESD protection for high speed interface