概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

运动、环境和振动传感解决方案是现代工业自动化系统的重要组成部分。线性或角度定位、机械系统健康监测、倾斜感知、校平、冲击或跌落检测是传感器技术在自动化传感系统中的创新应用实例。

意法半导体(ST)开发适用于振动和环境传感的专用工业运动MEMS产品,重点关注宽机械频率传感带宽、可靠性、传感稳定性,可在105°C温度下实现低噪声、低功耗、精确运行,是同行业中性能最佳且经济划算的紧凑型工业4.0有线及无线传感器网络解决方案。

传感器系统通常采用24V直流供电,需要额外的电源管理器件驱动传感器。此类传感器节点采用数字输出(如IO-Link)或模拟输出。模拟传感器通常由运算放大器调节信号,并连接到微控制器的模数转换器(如STM8 / STM32)。

    • FP-IND-PREDMNT1 is an STM32Cube function pack with algorithms for time and frequency domain signal processing and analysis of 3D digital accelerometers. A sensor node for condition monitoring and predictive maintenance applications can be developed with this function pack.

      Features

      •  3-axis MEMS accelerometer:
        •     time domain: speed RMS and acceleration peak
        •     frequency domain: up to 1 kHz FFT with programmable size, averaging, overlapping and windowing
      • MEMS microphone:
        •     sound pressure level (SPL)
        •     up to 20kHz FFT with pre-defined averaging and windowing
      • Pressure, relative humidity and temperature monitoring
      • Configurable thresholds for key parameters
      • Data logging through BLE App

       

      Solution Components
      产品型号 Description 状态 Core Products Price (US$)*
      Order / Download
      Buy All
      NUCLEO-F446RE

      Key features

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      Show more

      STM32 Nucleo-64 development board with STM32F446RE MCU, supports Arduino and ST morpho connectivity
      Active
      STM32F446RE 13.72 立即购买
      X-NUCLEO-CCA02M1

      Key features

      • 2 on-board MP34DT01-M digital MEMS microphones
      • 6 slots to plug in digital microphone coupon boards such as STEVAL-MKI129Vx and STEVAL-MKI155Vx
      • Synchronized acquisition and streaming of up to 4 microphones
      • Free comprehensive development firmware library and audio capture plus USB streaming sample application which is compatible with STM32Cube firmware
      • Compatible with STM32 Nucleo boards
      • Equipped with ST morpho connector (upwards and downwards)
      • Equipped with Arduino UNO R3 connector (upwards) to allow multiple boards
      • RoHS compliant

      Show more

      Digital MEMS microphones expansion board based on MP34DT01-M for STM32 Nucleo.
      Active
      MP34DT01-M 15.32 立即购买
      X-NUCLEO-IKS01A2

      Key features

      • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
      • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
      • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
      • HTS221: capacitive digital relative humidity and temperature
      • DIL24 socket for additional MEMS adapters and other sensors
      • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
      • I²C sensor hub features on LSM6DSL available
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • RoHS compliant

      Show more

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo
      Active
      LSM6DSL; LSM303AGR; LPS22HB; HTS221 18.38 立即购买
      X-NUCLEO-IDB05A1

      Key features

      • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
      • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
      • SPBTLE-RF:
        • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
        • Integrated Balun (BALF-NRG-01D3)
        • Chip antenna
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • Scalable solution, capable of cascading multiple boards for larger systems
      • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
      • RoHS compliant

      Show more

      Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo
      Active
      SPBTLE-RF; BlueNRG-MS; BALF-NRG-01D3 12.87 立即购买
      STEVAL-MKI182V2

      Key features

      • Complete ISM330DLC pinout for a standard DIL 24 socket
      • Fully compatible with STEVAL-MKI109V3 motherboard
      • Changing the resistor settings is also compatible with the STEVAL-MKI109V2 motherboard
      • RoHS compliant

      Show more

      ISM330DLC adapter board for a standard DIL24 socket
      Active
      ISM330DLC 15.93 立即购买
      FP-IND-PREDMNT1

      Key features

      • Complete firmware to develop a sensor node for condition monitoring and predictive maintenance applications, featuring digital or analog microphone, environmental and motion sensors, and performing real-time monitoring of parameters and equipment status via:
        • user terminal by UART (available for the STEVAL-IDP005V1 evaluation board included in the STEVAL-BFA001V1B kit)
        • Wi-Fi connectivity (available for the STEVAL-STWINCSV1 board included in the STEVAL-STWINKT1 kit)
        • BLE connectivity (available for the NUCLEO-F446RE development board and the STEVAL-STWINKT1 kit)
      • Signal processing (MotionSP) middleware for vibration analysis in time domain (speed RMS and acceleration peak) and frequency domain (FFT with programmable size, averaging, overlapping and windowing)
      • PDM to PCM and sound pressure level (SPL) middleware for digital microphones (for NUCLEO-F446RE and STEVAL-BFA001V1B)
      • Acoustic FFT Analysis for NUCLEO-F446RE and STEVAL-BFA001V1B
      • Ultrasound FFT Analysis for STEVAL-STWINKT1
      • Configurable alarm and warning thresholds for key parameters
      • Data logging capability through mobile app or PC serial terminal
      • Compatible with STBLESensor application for Android/iOS, to perform sensor data reading, audio and motion algorithm feature demo, and firmware update over the air (FOTA) (feature available only when using NUCLEO-F446RE and STEVAL-STWINKT1 with BLE connectivity)
      • Compatible with DSH-PREDMNT web-based predictive maintenance dashboard for monitoring sensor data and device status (feature available only when using the STEVAL-STWINKT1 with the STEVAL-STWINWFV1 Wi-Fi adapter)
      • Sample implementation available for the STEVAL-BFA001V1B and STEVAL-STWINKT1 kits
      • Sample implementation available for X-NUCLEO-CCA02M1, X-NUCLEO-IKS01A3 or X-NUCLEO-IKS01A2, STEVAL-MKI182V2 (DIL24 based on ISM330DLC) and X-NUCLEO-IDB05A1 connected to a NUCLEO-F446RE board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      Show more

      IMAGE

      FP-IND-PREDMNT1
      FP-IND-PREDMNT1
      STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance
      Active
      -
      软件
      产品型号 描述 Software Version 供应商 GitHub link 下载
      FP-IND-PREDMNT1 STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance 2.0.0 ST -
      FP-SNS-ALLMEMS2

      Key features

      • Complete firmware to develop an IoT node with BLE connectivity, digital microphone, environmental and motion sensors
      • Middleware libraries for sensor data fusion and accelerometer-based real-time activity recognition, acoustic source localization and beam forming, audio processing and streaming over BLE communication profile, and SD card data logging
      • Compatible with BlueMS application for Android/iOS, to perform sensor data reading, audio and motion algorithm feature demo, and firmware update over the air (FOTA)
      • Implementation based on the use of an RTOS, targeting ultra-low power consumption use cases with battery operated devices
      • Sample implementation available for STEVAL-BCNKT01V1 and STEVAL-STLKT01V1 evaluation boards and for X-NUCLEO-CCA02M1, X-NUCLEO-IKS01A2 and X-NUCLEO-IDB05A1 connected to a NUCLEO-F446RE or NUCLEO-L476RG board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      Show more

      IMAGE

      FP-SNS-ALLMEMS2
      FP-SNS-ALLMEMS2
      STM32Cube function pack for ultra-low power IoT node with BLE connectivity, digital microphone, environmental and motion sensors
      Active
      -
      软件
      产品型号 描述 Software Version 供应商 GitHub link 下载
      FP-SNS-ALLMEMS2 STM32Cube function pack for ultra-low power IoT node with BLE connectivity, digital microphone, environmental and motion sensors 1.0.0 ST -
      X-CUBE-BLE1

      Key features

      • Complete middleware to build Bluetooth low energy applications using BlueNRG-MS device
      • Easy portability across different MCU families, thanks to STM32Cube
      • Numerous examples to aid understanding:
        • Support for Standard Profiles (Peripheral and Central)
        • Support for Apple Notification Center Service (ANCS)
      • Package compatible with STM32CubeMX, can be downloaded from and installed directly into STM32CubeMX
      • Free, user-friendly license terms

      Show more

      IMAGE

      X-CUBE-BLE1
      X-CUBE-BLE1
      Bluetooth Low Energy software expansion for STM32Cube
      Active
      -
      软件
      产品型号 描述 Software Version 供应商 GitHub link 下载
      X-CUBE-BLE1 Bluetooth Low Energy software expansion for STM32Cube 4.4.0 ST -
      NUCLEO-F446RE

      描述 :

      STM32 Nucleo-64 development board with STM32F446RE MCU, supports Arduino and ST morpho connectivity

      Price (US$)*

      13.72

      Key features

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      Show more

      X-NUCLEO-CCA02M1

      描述 :

      Digital MEMS microphones expansion board based on MP34DT01-M for STM32 Nucleo.

      Price (US$)*

      15.32

      Key features

      • 2 on-board MP34DT01-M digital MEMS microphones
      • 6 slots to plug in digital microphone coupon boards such as STEVAL-MKI129Vx and STEVAL-MKI155Vx
      • Synchronized acquisition and streaming of up to 4 microphones
      • Free comprehensive development firmware library and audio capture plus USB streaming sample application which is compatible with STM32Cube firmware
      • Compatible with STM32 Nucleo boards
      • Equipped with ST morpho connector (upwards and downwards)
      • Equipped with Arduino UNO R3 connector (upwards) to allow multiple boards
      • RoHS compliant

      Show more

      X-NUCLEO-IKS01A2

      描述 :

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo

      Price (US$)*

      18.38

      Key features

      • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
      • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
      • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
      • HTS221: capacitive digital relative humidity and temperature
      • DIL24 socket for additional MEMS adapters and other sensors
      • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
      • I²C sensor hub features on LSM6DSL available
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • RoHS compliant

      Show more

      X-NUCLEO-IDB05A1

      描述 :

      Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

      Price (US$)*

      12.87

      Key features

      • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
      • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
      • SPBTLE-RF:
        • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
        • Integrated Balun (BALF-NRG-01D3)
        • Chip antenna
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • Scalable solution, capable of cascading multiple boards for larger systems
      • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
      • RoHS compliant

      Show more

      STEVAL-MKI182V2

      描述 :

      ISM330DLC adapter board for a standard DIL24 socket

      Price (US$)*

      15.93

      Key features

      • Complete ISM330DLC pinout for a standard DIL 24 socket
      • Fully compatible with STEVAL-MKI109V3 motherboard
      • Changing the resistor settings is also compatible with the STEVAL-MKI109V2 motherboard
      • RoHS compliant

      Show more

      FP-IND-PREDMNT1

      描述 :

      STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance

      Price (US$)*

      -
      软件

      Key features

      • Complete firmware to develop a sensor node for condition monitoring and predictive maintenance applications, featuring digital or analog microphone, environmental and motion sensors, and performing real-time monitoring of parameters and equipment status via:
        • user terminal by UART (available for the STEVAL-IDP005V1 evaluation board included in the STEVAL-BFA001V1B kit)
        • Wi-Fi connectivity (available for the STEVAL-STWINCSV1 board included in the STEVAL-STWINKT1 kit)
        • BLE connectivity (available for the NUCLEO-F446RE development board and the STEVAL-STWINKT1 kit)
      • Signal processing (MotionSP) middleware for vibration analysis in time domain (speed RMS and acceleration peak) and frequency domain (FFT with programmable size, averaging, overlapping and windowing)
      • PDM to PCM and sound pressure level (SPL) middleware for digital microphones (for NUCLEO-F446RE and STEVAL-BFA001V1B)
      • Acoustic FFT Analysis for NUCLEO-F446RE and STEVAL-BFA001V1B
      • Ultrasound FFT Analysis for STEVAL-STWINKT1
      • Configurable alarm and warning thresholds for key parameters
      • Data logging capability through mobile app or PC serial terminal
      • Compatible with STBLESensor application for Android/iOS, to perform sensor data reading, audio and motion algorithm feature demo, and firmware update over the air (FOTA) (feature available only when using NUCLEO-F446RE and STEVAL-STWINKT1 with BLE connectivity)
      • Compatible with DSH-PREDMNT web-based predictive maintenance dashboard for monitoring sensor data and device status (feature available only when using the STEVAL-STWINKT1 with the STEVAL-STWINWFV1 Wi-Fi adapter)
      • Sample implementation available for the STEVAL-BFA001V1B and STEVAL-STWINKT1 kits
      • Sample implementation available for X-NUCLEO-CCA02M1, X-NUCLEO-IKS01A3 or X-NUCLEO-IKS01A2, STEVAL-MKI182V2 (DIL24 based on ISM330DLC) and X-NUCLEO-IDB05A1 connected to a NUCLEO-F446RE board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      Show more

      IMAGE

      FP-IND-PREDMNT1
      FP-IND-PREDMNT1
      产品型号 描述 Software Version 供应商 GitHub link 下载
      FP-IND-PREDMNT1 STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance 2.0.0 ST -
      FP-SNS-ALLMEMS2

      描述 :

      STM32Cube function pack for ultra-low power IoT node with BLE connectivity, digital microphone, environmental and motion sensors

      Price (US$)*

      -
      软件

      Key features

      • Complete firmware to develop an IoT node with BLE connectivity, digital microphone, environmental and motion sensors
      • Middleware libraries for sensor data fusion and accelerometer-based real-time activity recognition, acoustic source localization and beam forming, audio processing and streaming over BLE communication profile, and SD card data logging
      • Compatible with BlueMS application for Android/iOS, to perform sensor data reading, audio and motion algorithm feature demo, and firmware update over the air (FOTA)
      • Implementation based on the use of an RTOS, targeting ultra-low power consumption use cases with battery operated devices
      • Sample implementation available for STEVAL-BCNKT01V1 and STEVAL-STLKT01V1 evaluation boards and for X-NUCLEO-CCA02M1, X-NUCLEO-IKS01A2 and X-NUCLEO-IDB05A1 connected to a NUCLEO-F446RE or NUCLEO-L476RG board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      Show more

      IMAGE

      FP-SNS-ALLMEMS2
      FP-SNS-ALLMEMS2
      产品型号 描述 Software Version 供应商 GitHub link 下载
      FP-SNS-ALLMEMS2 STM32Cube function pack for ultra-low power IoT node with BLE connectivity, digital microphone, environmental and motion sensors 1.0.0 ST -
      X-CUBE-BLE1

      描述 :

      Bluetooth Low Energy software expansion for STM32Cube

      Price (US$)*

      -
      软件

      Key features

      • Complete middleware to build Bluetooth low energy applications using BlueNRG-MS device
      • Easy portability across different MCU families, thanks to STM32Cube
      • Numerous examples to aid understanding:
        • Support for Standard Profiles (Peripheral and Central)
        • Support for Apple Notification Center Service (ANCS)
      • Package compatible with STM32CubeMX, can be downloaded from and installed directly into STM32CubeMX
      • Free, user-friendly license terms

      Show more

      IMAGE

      X-CUBE-BLE1
      X-CUBE-BLE1
      产品型号 描述 Software Version 供应商 GitHub link 下载
      X-CUBE-BLE1 Bluetooth Low Energy software expansion for STM32Cube 4.4.0 ST -
    • Implementation of a smart industrial sensor node is easily achievable with the STEVAL-BFA001V1B.

      An industrial sensor shape form factor PCB featuring our 10-years longevity sensors for the industrial market and a powerful software package where ready-to-use software examples for FFT are available.

      Features

      • 3-axis MEMS accelerometer:
        •     time domain: speed RMS and    acceleration peak
        •     frequency domain: up to 3 kHz FFT with programmable size, averaging, overlapping and windowing
      • MEMS microphone:
        •     sound pressure level (SPL)
        •     up to 20kHz FFT with pre-defined averaging and windowing
      • Pressure, relative humidity and temperature monitoring
      • Configurable thresholds for key parameters
      • Data logging through UART and PC hyper terminal

       

      Solution Components
      产品型号 Description 状态 Core Products Price (US$)*
      Order / Download
      STEVAL-BFA001V1B

      Key features

      • Compact solution for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors
      • Main supply voltage: 18 V - 32 V
      • Main components:
        • 32-bit ARM® Cortex® -M4 core for signal processing and analysis (STM32F469AI)
        • iNEMO 6DoF (ISM330DLC)
        • Absolute digital pressure sensor (LPS22HB)
        • Relative humidity and temperature sensors (HTS221)
        • Digital microphone sensors (MP34DT05-A)
        • IO-Link PHY device (L6362A)
        • EEPROM (M95M01-DF) for data storage
        • Step-down switching regulator and LDO regulator (L6984 and LDK220)
      • Complete set of firmware demo examples based on 3D accelerometer library with advanced frequency and time domain signal processing for predictive maintenance, including:
        • Programmable FFT size (512, 1024, 2048)
        • Programmable FFT averaging
        • Programmable overlapping
        • Programmable windowing (Flat Top, Hanning, Hamming)
        • Speed RMS moving average, acceleration max. peak
        • Programmable threshold for warning and alarm conditions in spectral band
      • Microphone algorithms for:
        • PDM to PCM
        • Sound pressure
        • Audio FFT
      • IO-Link PHY using the L6362A Device transceiver for data communication with host unit
      • M12 industrial connector
      • SWD connector for debugging and programming capability
      • Reset button
      • Expansion connector with GPIO, ADC, I2C bus
      • Designed to meet IEC industrial standard requirements
      • WEEE compliant
      • RoHS compliant

      Show more

      Predictive maintenance kit with sensors and IO-Link capability
      Active
      HTS221, ISM330DLC, LP25HB, M95M01-DF, MP34DT05-A, L6362A 117.60 立即购买
      FP-IND-PREDMNT1

      Key features

      • Complete firmware to develop a sensor node for condition monitoring and predictive maintenance applications, featuring digital or analog microphone, environmental and motion sensors, and performing real-time monitoring of parameters and equipment status via:
        • user terminal by UART (available for the STEVAL-IDP005V1 evaluation board included in the STEVAL-BFA001V1B kit)
        • Wi-Fi connectivity (available for the STEVAL-STWINCSV1 board included in the STEVAL-STWINKT1 kit)
        • BLE connectivity (available for the NUCLEO-F446RE development board and the STEVAL-STWINKT1 kit)
      • Signal processing (MotionSP) middleware for vibration analysis in time domain (speed RMS and acceleration peak) and frequency domain (FFT with programmable size, averaging, overlapping and windowing)
      • PDM to PCM and sound pressure level (SPL) middleware for digital microphones (for NUCLEO-F446RE and STEVAL-BFA001V1B)
      • Acoustic FFT Analysis for NUCLEO-F446RE and STEVAL-BFA001V1B
      • Ultrasound FFT Analysis for STEVAL-STWINKT1
      • Configurable alarm and warning thresholds for key parameters
      • Data logging capability through mobile app or PC serial terminal
      • Compatible with STBLESensor application for Android/iOS, to perform sensor data reading, audio and motion algorithm feature demo, and firmware update over the air (FOTA) (feature available only when using NUCLEO-F446RE and STEVAL-STWINKT1 with BLE connectivity)
      • Compatible with DSH-PREDMNT web-based predictive maintenance dashboard for monitoring sensor data and device status (feature available only when using the STEVAL-STWINKT1 with the STEVAL-STWINWFV1 Wi-Fi adapter)
      • Sample implementation available for the STEVAL-BFA001V1B and STEVAL-STWINKT1 kits
      • Sample implementation available for X-NUCLEO-CCA02M1, X-NUCLEO-IKS01A3 or X-NUCLEO-IKS01A2, STEVAL-MKI182V2 (DIL24 based on ISM330DLC) and X-NUCLEO-IDB05A1 connected to a NUCLEO-F446RE board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      Show more

      IMAGE

      FP-IND-PREDMNT1
      FP-IND-PREDMNT1
      STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance
      Active
      -
      软件
      产品型号 描述 Software Version 供应商 GitHub link 下载
      FP-IND-PREDMNT1 STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance 2.0.0 ST -
      STEVAL-BFA001V1B

      描述 :

      Predictive maintenance kit with sensors and IO-Link capability

      Price (US$)*

      117.60

      Key features

      • Compact solution for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors
      • Main supply voltage: 18 V - 32 V
      • Main components:
        • 32-bit ARM® Cortex® -M4 core for signal processing and analysis (STM32F469AI)
        • iNEMO 6DoF (ISM330DLC)
        • Absolute digital pressure sensor (LPS22HB)
        • Relative humidity and temperature sensors (HTS221)
        • Digital microphone sensors (MP34DT05-A)
        • IO-Link PHY device (L6362A)
        • EEPROM (M95M01-DF) for data storage
        • Step-down switching regulator and LDO regulator (L6984 and LDK220)
      • Complete set of firmware demo examples based on 3D accelerometer library with advanced frequency and time domain signal processing for predictive maintenance, including:
        • Programmable FFT size (512, 1024, 2048)
        • Programmable FFT averaging
        • Programmable overlapping
        • Programmable windowing (Flat Top, Hanning, Hamming)
        • Speed RMS moving average, acceleration max. peak
        • Programmable threshold for warning and alarm conditions in spectral band
      • Microphone algorithms for:
        • PDM to PCM
        • Sound pressure
        • Audio FFT
      • IO-Link PHY using the L6362A Device transceiver for data communication with host unit
      • M12 industrial connector
      • SWD connector for debugging and programming capability
      • Reset button
      • Expansion connector with GPIO, ADC, I2C bus
      • Designed to meet IEC industrial standard requirements
      • WEEE compliant
      • RoHS compliant

      Show more

      FP-IND-PREDMNT1

      描述 :

      STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance

      Price (US$)*

      -
      软件

      Key features

      • Complete firmware to develop a sensor node for condition monitoring and predictive maintenance applications, featuring digital or analog microphone, environmental and motion sensors, and performing real-time monitoring of parameters and equipment status via:
        • user terminal by UART (available for the STEVAL-IDP005V1 evaluation board included in the STEVAL-BFA001V1B kit)
        • Wi-Fi connectivity (available for the STEVAL-STWINCSV1 board included in the STEVAL-STWINKT1 kit)
        • BLE connectivity (available for the NUCLEO-F446RE development board and the STEVAL-STWINKT1 kit)
      • Signal processing (MotionSP) middleware for vibration analysis in time domain (speed RMS and acceleration peak) and frequency domain (FFT with programmable size, averaging, overlapping and windowing)
      • PDM to PCM and sound pressure level (SPL) middleware for digital microphones (for NUCLEO-F446RE and STEVAL-BFA001V1B)
      • Acoustic FFT Analysis for NUCLEO-F446RE and STEVAL-BFA001V1B
      • Ultrasound FFT Analysis for STEVAL-STWINKT1
      • Configurable alarm and warning thresholds for key parameters
      • Data logging capability through mobile app or PC serial terminal
      • Compatible with STBLESensor application for Android/iOS, to perform sensor data reading, audio and motion algorithm feature demo, and firmware update over the air (FOTA) (feature available only when using NUCLEO-F446RE and STEVAL-STWINKT1 with BLE connectivity)
      • Compatible with DSH-PREDMNT web-based predictive maintenance dashboard for monitoring sensor data and device status (feature available only when using the STEVAL-STWINKT1 with the STEVAL-STWINWFV1 Wi-Fi adapter)
      • Sample implementation available for the STEVAL-BFA001V1B and STEVAL-STWINKT1 kits
      • Sample implementation available for X-NUCLEO-CCA02M1, X-NUCLEO-IKS01A3 or X-NUCLEO-IKS01A2, STEVAL-MKI182V2 (DIL24 based on ISM330DLC) and X-NUCLEO-IDB05A1 connected to a NUCLEO-F446RE board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      Show more

      IMAGE

      FP-IND-PREDMNT1
      FP-IND-PREDMNT1
      产品型号 描述 Software Version 供应商 GitHub link 下载
      FP-IND-PREDMNT1 STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance 2.0.0 ST -
    • STEVAL-BFA001V1B (smart industrial sensor) and STEVAL-IDP004V1 (multi-port IO-Link evaluation board) make condition monitoring and predictive maintenance of up to 4 nodes simultaneously.

      This use-case features a PC connection via RS485 with the STEVAL-IDP004V1 multi-port IO-Link interface. The PC GUI allows the monitoring of 4 nodes: pressure, humidity, temperature and 3-axis vibration (where you can adjust thresholds and other settings) under inspection with the powerful libraries embedded in the STEVAL-BFA001V1B software package.

      Features

      • 3-axis MEMS accelerometer:
        •     time domain : speed RMS and acceleration peak
        •     frequency domain: up to 3 kHz FFT with programmable size, averaging, overlapping and windowing
      • MEMS microphone:
        •     sound pressure level (SPL) 
        •     up to 20kHz FFT with pre-defined averaging and windowing
      • Pressure, relative humidity and temperature monitoring
      • Configurable thresholds for key parameters
      • Data logging capability through PC GUI

       

      Solution Components
      产品型号 Description 状态 Core Products Price (US$)*
      Order / Download
      Buy All
      STEVAL-BFA001V1B

      Key features

      • Compact solution for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors
      • Main supply voltage: 18 V - 32 V
      • Main components:
        • 32-bit ARM® Cortex® -M4 core for signal processing and analysis (STM32F469AI)
        • iNEMO 6DoF (ISM330DLC)
        • Absolute digital pressure sensor (LPS22HB)
        • Relative humidity and temperature sensors (HTS221)
        • Digital microphone sensors (MP34DT05-A)
        • IO-Link PHY device (L6362A)
        • EEPROM (M95M01-DF) for data storage
        • Step-down switching regulator and LDO regulator (L6984 and LDK220)
      • Complete set of firmware demo examples based on 3D accelerometer library with advanced frequency and time domain signal processing for predictive maintenance, including:
        • Programmable FFT size (512, 1024, 2048)
        • Programmable FFT averaging
        • Programmable overlapping
        • Programmable windowing (Flat Top, Hanning, Hamming)
        • Speed RMS moving average, acceleration max. peak
        • Programmable threshold for warning and alarm conditions in spectral band
      • Microphone algorithms for:
        • PDM to PCM
        • Sound pressure
        • Audio FFT
      • IO-Link PHY using the L6362A Device transceiver for data communication with host unit
      • M12 industrial connector
      • SWD connector for debugging and programming capability
      • Reset button
      • Expansion connector with GPIO, ADC, I2C bus
      • Designed to meet IEC industrial standard requirements
      • WEEE compliant
      • RoHS compliant

      Show more

      Predictive maintenance kit with sensors and IO-Link capability
      Active
      HTS221, ISM330DLC, LP25HB, M95M01-DF, MP34DT05-A, L6362A 117.60 立即购买
      STEVAL-IDP004V1

      Key features

      • Main supply voltage 32 V maximum
      • 4 L6360 IO-Link master devices
      • RS-485 serial interface
      • CAN serial interface
      • USB interface
      • DC-DC converter
      • On-board reverse polarity protection
      • Designed to meet IEC requirement for industrial standards
      • RoHS and WEEE compliant

      Show more

      IO-Link master multi-port evaluation board based on L6360
      Active
      L6360 123.73 立即购买
      STSW-BFA001V1

      Key features

      • Set of firmware examples to build applications for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors
      • Middleware including algorithms for advanced time and frequency domain signal processing for vibration analysis
        • Programmable FFT size (512, 1024 or 2048 points)
        • Programmable FFT averaging and overlapping
        • Programmable windowing (Flat Top, Hanning, Hamming)
        • Speed RMS moving average, acceleration max peak
      • Middleware integrating microphone algorithms for:
        • PDM to PCM
        • Sound pressure
        • Audio FFT
      • Firmware package developed for STM32F469AI with easy portability across different MCU families
      • PC data monitoring through any free terminal emulator
      • Sample demonstration firmware to communicate with STEVAL-IDP004V1 IO-Link-master-capable multi-port evaluation board and dedicated PC GUI

      Show more

      IMAGE

      STSW-BFA001V1
      STSW-BFA001V1
      Software package for STEVAL-BFA001V1B
      Active
      -
      软件
      产品型号 Software Version 供货状态 供应商 下载
      STSW-BFA001V1 1.1.0 Active ST
      STSW-IOLINKGUI

      Key features

      • Automatic firmware version identification
      • For the STEVAL-IOM001V1:
        • Control of the evaluation board through the NUCLEO-F446RE board
        • L6360 address selection
        • I²C control for internal register configuration and monitoring
        • Dedicated control of L6360 RESET, ENL+,ENC/Q and SEL pins
        • Fault detection via IRQ pin monitoring
        • UART control (INC/Q, OUTC/Q) with speed selection (COM1, COM2, COM3)
        • LED1 and LED2 control
      • For the STEVAL-IOD003V1:
        • Control of the evaluation board through the NUCLEO-L073RZ board
        • Dedicated control of L6362A EN/DIAG and SEL pins
        • UART control (IN2, OUTI/Q) with speed selection (COM1, COM2, COM3)
        • Fault detection via OL and EN/DIAG pin monitoring

      Show more

      IMAGE

      STSW-IOLINKGUI
      STSW-IOLINKGUI
      Graphical user interface for the STEVAL-IOM001V1 and STEVAL-IOD003V1 IO-Link evaluation boards
      Active
      -
      软件
      产品型号 Software Version 供货状态 供应商 下载
      STSW-IOLINKGUI 1.0.0 Active ST
      STEVAL-BFA001V1B

      描述 :

      Predictive maintenance kit with sensors and IO-Link capability

      Price (US$)*

      117.60

      Key features

      • Compact solution for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors
      • Main supply voltage: 18 V - 32 V
      • Main components:
        • 32-bit ARM® Cortex® -M4 core for signal processing and analysis (STM32F469AI)
        • iNEMO 6DoF (ISM330DLC)
        • Absolute digital pressure sensor (LPS22HB)
        • Relative humidity and temperature sensors (HTS221)
        • Digital microphone sensors (MP34DT05-A)
        • IO-Link PHY device (L6362A)
        • EEPROM (M95M01-DF) for data storage
        • Step-down switching regulator and LDO regulator (L6984 and LDK220)
      • Complete set of firmware demo examples based on 3D accelerometer library with advanced frequency and time domain signal processing for predictive maintenance, including:
        • Programmable FFT size (512, 1024, 2048)
        • Programmable FFT averaging
        • Programmable overlapping
        • Programmable windowing (Flat Top, Hanning, Hamming)
        • Speed RMS moving average, acceleration max. peak
        • Programmable threshold for warning and alarm conditions in spectral band
      • Microphone algorithms for:
        • PDM to PCM
        • Sound pressure
        • Audio FFT
      • IO-Link PHY using the L6362A Device transceiver for data communication with host unit
      • M12 industrial connector
      • SWD connector for debugging and programming capability
      • Reset button
      • Expansion connector with GPIO, ADC, I2C bus
      • Designed to meet IEC industrial standard requirements
      • WEEE compliant
      • RoHS compliant

      Show more

      STEVAL-IDP004V1

      描述 :

      IO-Link master multi-port evaluation board based on L6360

      Price (US$)*

      123.73

      Key features

      • Main supply voltage 32 V maximum
      • 4 L6360 IO-Link master devices
      • RS-485 serial interface
      • CAN serial interface
      • USB interface
      • DC-DC converter
      • On-board reverse polarity protection
      • Designed to meet IEC requirement for industrial standards
      • RoHS and WEEE compliant

      Show more

      STSW-BFA001V1

      描述 :

      Software package for STEVAL-BFA001V1B

      Price (US$)*

      -
      软件

      Key features

      • Set of firmware examples to build applications for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors
      • Middleware including algorithms for advanced time and frequency domain signal processing for vibration analysis
        • Programmable FFT size (512, 1024 or 2048 points)
        • Programmable FFT averaging and overlapping
        • Programmable windowing (Flat Top, Hanning, Hamming)
        • Speed RMS moving average, acceleration max peak
      • Middleware integrating microphone algorithms for:
        • PDM to PCM
        • Sound pressure
        • Audio FFT
      • Firmware package developed for STM32F469AI with easy portability across different MCU families
      • PC data monitoring through any free terminal emulator
      • Sample demonstration firmware to communicate with STEVAL-IDP004V1 IO-Link-master-capable multi-port evaluation board and dedicated PC GUI

      Show more

      IMAGE

      STSW-BFA001V1
      STSW-BFA001V1
      产品型号 Software Version 供货状态 供应商 下载
      STSW-BFA001V1 1.1.0 Active ST
      STSW-IOLINKGUI

      描述 :

      Graphical user interface for the STEVAL-IOM001V1 and STEVAL-IOD003V1 IO-Link evaluation boards

      Price (US$)*

      -
      软件

      Key features

      • Automatic firmware version identification
      • For the STEVAL-IOM001V1:
        • Control of the evaluation board through the NUCLEO-F446RE board
        • L6360 address selection
        • I²C control for internal register configuration and monitoring
        • Dedicated control of L6360 RESET, ENL+,ENC/Q and SEL pins
        • Fault detection via IRQ pin monitoring
        • UART control (INC/Q, OUTC/Q) with speed selection (COM1, COM2, COM3)
        • LED1 and LED2 control
      • For the STEVAL-IOD003V1:
        • Control of the evaluation board through the NUCLEO-L073RZ board
        • Dedicated control of L6362A EN/DIAG and SEL pins
        • UART control (IN2, OUTI/Q) with speed selection (COM1, COM2, COM3)
        • Fault detection via OL and EN/DIAG pin monitoring

      Show more

      IMAGE

      STSW-IOLINKGUI
      STSW-IOLINKGUI
      产品型号 Software Version 供货状态 供应商 下载
      STSW-IOLINKGUI 1.0.0 Active ST

产品型号
Description
STEVAL-IDP004V1 IO-Link master multi-port evaluation board based on L6360 Quick view

主要特性

  • Main supply voltage 32 V maximum
  • 4 L6360 IO-Link master devices
  • RS-485 serial interface
  • CAN serial interface
  • USB interface
  • DC-DC converter
  • On-board reverse polarity protection
  • Designed to meet IEC requirement for industrial standards
  • RoHS and WEEE compliant

Show More

STEVAL-BFA001V1B Predictive maintenance kit with sensors and IO-Link capability Quick view

主要特性

  • Compact solution for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors
  • Main supply voltage: 18 V - 32 V
  • Main components:
    • 32-bit ARM® Cortex® -M4 core for signal processing and analysis (STM32F469AI)
    • iNEMO 6DoF (ISM330DLC)
    • Absolute digital pressure sensor (LPS22HB)
    • Relative humidity and temperature sensors (HTS221)
    • Digital microphone sensors (MP34DT05-A)
    • IO-Link PHY device (L6362A)
    • EEPROM (M95M01-DF) for data storage
    • Step-down switching regulator and LDO regulator (L6984 and LDK220)
  • Complete set of firmware demo examples based on 3D accelerometer library with advanced frequency and time domain signal processing for predictive maintenance, including:
    • Programmable FFT size (512, 1024, 2048)
    • Programmable FFT averaging
    • Programmable overlapping
    • Programmable windowing (Flat Top, Hanning, Hamming)
    • Speed RMS moving average, acceleration max. peak
    • Programmable threshold for warning and alarm conditions in spectral band
  • Microphone algorithms for:
    • PDM to PCM
    • Sound pressure
    • Audio FFT
  • IO-Link PHY using the L6362A Device transceiver for data communication with host unit
  • M12 industrial connector
  • SWD connector for debugging and programming capability
  • Reset button
  • Expansion connector with GPIO, ADC, I2C bus
  • Designed to meet IEC industrial standard requirements
  • WEEE compliant
  • RoHS compliant

Show More

X-NUCLEO-IKS01A2 Motion MEMS and environmental sensor expansion board for STM32 Nucleo Quick view

主要特性

  • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
  • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
  • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
  • HTS221: capacitive digital relative humidity and temperature
  • DIL24 socket for additional MEMS adapters and other sensors
  • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
  • I²C sensor hub features on LSM6DSL available
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • RoHS compliant

Show More

产品型号
STEVAL-IDP004V1

IO-Link master multi-port evaluation board based on L6360

主要特性

  • Main supply voltage 32 V maximum
  • 4 L6360 IO-Link master devices
  • RS-485 serial interface
  • CAN serial interface
  • USB interface
  • DC-DC converter
  • On-board reverse polarity protection
  • Designed to meet IEC requirement for industrial standards
  • RoHS and WEEE compliant

Show More

STEVAL-BFA001V1B

Predictive maintenance kit with sensors and IO-Link capability

主要特性

  • Compact solution for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors
  • Main supply voltage: 18 V - 32 V
  • Main components:
    • 32-bit ARM® Cortex® -M4 core for signal processing and analysis (STM32F469AI)
    • iNEMO 6DoF (ISM330DLC)
    • Absolute digital pressure sensor (LPS22HB)
    • Relative humidity and temperature sensors (HTS221)
    • Digital microphone sensors (MP34DT05-A)
    • IO-Link PHY device (L6362A)
    • EEPROM (M95M01-DF) for data storage
    • Step-down switching regulator and LDO regulator (L6984 and LDK220)
  • Complete set of firmware demo examples based on 3D accelerometer library with advanced frequency and time domain signal processing for predictive maintenance, including:
    • Programmable FFT size (512, 1024, 2048)
    • Programmable FFT averaging
    • Programmable overlapping
    • Programmable windowing (Flat Top, Hanning, Hamming)
    • Speed RMS moving average, acceleration max. peak
    • Programmable threshold for warning and alarm conditions in spectral band
  • Microphone algorithms for:
    • PDM to PCM
    • Sound pressure
    • Audio FFT
  • IO-Link PHY using the L6362A Device transceiver for data communication with host unit
  • M12 industrial connector
  • SWD connector for debugging and programming capability
  • Reset button
  • Expansion connector with GPIO, ADC, I2C bus
  • Designed to meet IEC industrial standard requirements
  • WEEE compliant
  • RoHS compliant

Show More

X-NUCLEO-IKS01A2

Motion MEMS and environmental sensor expansion board for STM32 Nucleo

主要特性

  • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
  • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
  • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
  • HTS221: capacitive digital relative humidity and temperature
  • DIL24 socket for additional MEMS adapters and other sensors
  • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
  • I²C sensor hub features on LSM6DSL available
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • Description 版本 文档大小 操作
      AN5146
      IIS3DHHC: high-resolution, high-stability 3-axis digital accelerometer
      2.0
      411.03 KB
      PDF
      AN5041
      IO-Link evaluation kit using STEVAL-IDP004V1 master evaluation board and STEVAL-IDP003V1 kit
      3.0
      1.96 MB
      PDF
      AN5063
      LPS33HW digital pressure sensor: guidelines for system integration
      1.0
      681.3 KB
      PDF
      AN4113
      Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32F05x USART
      1.3
      142.25 KB
      PDF
      AN3070
      管理驱动器使能信号以使用STM32™的 USART 进行 RS-485 和 IO-Link 通信
      1.4
      467.28 KB
      PDF
      AN4075
      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board
      1.0
      409.41 KB
      PDF
      AN5146

      IIS3DHHC: high-resolution, high-stability 3-axis digital accelerometer

      AN5041

      IO-Link evaluation kit using STEVAL-IDP004V1 master evaluation board and STEVAL-IDP003V1 kit

      AN5063

      LPS33HW digital pressure sensor: guidelines for system integration

      AN4113

      Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32F05x USART

      AN3070

      管理驱动器使能信号以使用STM32™的 USART 进行 RS-485 和 IO-Link 通信

      AN4075

      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board

    • Description 版本 文档大小 操作
      DT0064
      MEMS 传感器中的噪声分析和识别,Allan,时间,Hadamard,重叠,修正,总体方差
      1.0
      673.72 KB
      PDF
      DT0064

      MEMS 传感器中的噪声分析和识别,Allan,时间,Hadamard,重叠,修正,总体方差

演示和培训资料

    • Description 版本 文档大小 操作
      FP-CLD-AWS1 quick start guide 2.1
      5.55 MB
      PDF
      FP-CLD-AZURE1 quick start guide 3.3
      4.84 MB
      PDF
      FP-CLD-WATSON1 Quick start guide 2.4
      3.26 MB
      PDF
      FP-NET-BLESTAR1 Quick start guide 1.6
      3.83 MB
      PDF
      IoT: Cloud Connectivity Expansion Packages for STM32Cube 1.0
      895.03 KB
      PDF
      LPWAN Technologies For IoT Francesco Doddo 1.0
      7.55 MB
      PDF
      STEVAL-BFA001V1B GETTING STARTED GUIDE 1.1
      3.41 MB
      PDF
      STEVAL-STLKT01V1 Quick start guide 2.4
      2.02 MB
      PDF

      FP-CLD-AWS1 quick start guide

      FP-CLD-AZURE1 quick start guide

      FP-CLD-WATSON1 Quick start guide

      FP-NET-BLESTAR1 Quick start guide

      IoT: Cloud Connectivity Expansion Packages for STM32Cube

      LPWAN Technologies For IoT Francesco Doddo

      STEVAL-BFA001V1B GETTING STARTED GUIDE

      STEVAL-STLKT01V1 Quick start guide

出版刊物和宣传资料

    • Description 版本 文档大小 操作
      L6360 and L6362A - Embracing the Industry 4.0 revolution 12.2018
      282.88 KB
      PDF
      MEMS传感器面向智能工业4.0 4.0
      4.74 MB
      PDF
      s2-LP:超低功耗、高性能、Sub-1 HGz RF收发器 3.0
      824.66 KB
      PDF
      STSAFE-TPM Standardized solution for trusted devices 1.0
      195 KB
      PDF
      SensorTile an IoT design lab
      1.61 MB
      PDF

      L6360 and L6362A - Embracing the Industry 4.0 revolution

      MEMS传感器面向智能工业4.0

      s2-LP:超低功耗、高性能、Sub-1 HGz RF收发器

      STSAFE-TPM Standardized solution for trusted devices

      SensorTile an IoT design lab

    • Description 版本 文档大小 操作
      Brochure Secure MCUs - Secure Solutions 1.0
      1.48 MB
      PDF
      Intelligent power switches (IPS) 04.2018
      4.21 MB
      PDF
      面向IO-Link的 产品和解决方案 08.2017
      491.91 KB
      PDF
      Products and solutions for Smart industry 3.0
      3.32 MB
      PDF
      STM32L series - Ultra-low-power 32-bit MCUs 18.11
      3.86 MB
      PDF

      Brochure Secure MCUs - Secure Solutions

      Intelligent power switches (IPS)

      面向IO-Link的 产品和解决方案

      Products and solutions for Smart industry

      STM32L series - Ultra-low-power 32-bit MCUs

    • Description 版本 文档大小 操作
      Capacitive MEMS accelerometer for condition monitoring 1.0
      3.35 MB
      PDF

      Capacitive MEMS accelerometer for condition monitoring

软件

    • 产品型号

      STM32Cube function pack for multi sensors node with signal processing to enable predictive maintenance

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

MEMS and Sensors

产品型号 Description
IIS2DH 3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
IIS3DHHC High-resolution, high-stability 3-axis digital inclinometer for industrial applications
产品型号
3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
High-resolution, high-stability 3-axis digital inclinometer for industrial applications