概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

Governments and agencies worldwide are setting increasingly demanding and strict rules and policies to enhance the security of both drivers and passengers. This has led to the  adoption of emergency call systems – or e-call  systems – that can automatically alert first-responder services whenever an accident or car breakdown occurs.

To enable this service, vehicles will need to be equipped with a module that can sense fault conditions, provide localization, communication and a voice interface with the vehicle’s occupants.

ST’s portfolio includes automotive grade sensors, GNSS receivers and application processors to help design the modules required to enable in-car e-call systems.

产品型号
Description
STEVAL-MKI110V1 AIS328DQ adapter board for standard DIL24 socket Quick view

主要特性

  • Complete AIS328DQ pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

图片

Image
Image
STEVAL-MKI125V1 A3G4250D adapter board for standard DIL 24 socket Quick view

主要特性

  • Complete A3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal Quick view

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

STEVAL-MKI158V1 AIS3624DQ adapter board for a standard DIL24 socket Quick view

主要特性

  • Complete AIS3624DQ pin-out for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

STEVAL-ISA188V1 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F3V3 Quick view

主要特性

  • AECQ100 qualification
  • 1.5 A DC output current
  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • Programmable ISKIP current
  • 30 μA IQ at light load (LCM VIN = 12 V)
  • 8 μA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Fixed output voltage VOUT = 3.3 V
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

EVAL-L5963 L5963 Evaluation board Quick view

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

STEVAL-OET003V1 Evaluation board for automotive-grade ESD protection Quick view

主要特性

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

STEVAL-MKI109V3 Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters Quick view

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

EVAL-L5963Q L5963Q evaluation board Quick view

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

EVB-T3 TESEO III evaluation board Quick view

主要特性

  • ST Teseo III GNSS platform;
  • Multiconstellation GNSS: GPS, Galileo, Glonass, Beidou, QZSS are supported;
  • USB Power Supply and battery charge;
  • Internal battery for standalone usage;
  • ON/OFF and Reset buttons available;
  • NMEA over:
    • Bluetooth;
    • UART by USB;
    • USB;
  • μSD/MMC card reader for easy logging;
  • ST 3 axis gyroscope, ST 3 axis accelerometer and ST pressure sensor to enable ST Teseo DRAW1;
  • PPS output;
  • Leds:
    • PPS
    • Fix status
    • Antenna sensing
    • Power

Show More

STEVAL-IDB007V2 STEVAL-IDB007V2 evaluation platform based on the BlueNRG-1 Quick view

主要特性

  • Bluetooth® SMART board based on the BlueNRG-1 Bluetooth low energy system on chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® low energy compliant, supports master, slave and simultaneous master-and-slave roles
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

STEVAL-MKI109V2 eMotion: ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards Quick view

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F103RET6 high-performance ARM Cortex -M3 microcontroller
  • Includes a DIL24 socket for easy MEMS adapter connection
  • 3 V on-board linear voltage regulator
  • DFU compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Debugging connector for SWD/JTAG
  • RoHS compliant

Show More

产品型号
STEVAL-MKI110V1

AIS328DQ adapter board for standard DIL24 socket

主要特性

  • Complete AIS328DQ pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

图片

Image
Image
STEVAL-MKI125V1

A3G4250D adapter board for standard DIL 24 socket

主要特性

  • Complete A3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

STEVAL-MKI158V1

AIS3624DQ adapter board for a standard DIL24 socket

主要特性

  • Complete AIS3624DQ pin-out for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

STEVAL-ISA188V1

38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F3V3

主要特性

  • AECQ100 qualification
  • 1.5 A DC output current
  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • Programmable ISKIP current
  • 30 μA IQ at light load (LCM VIN = 12 V)
  • 8 μA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Fixed output voltage VOUT = 3.3 V
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

EVAL-L5963

L5963 Evaluation board

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

STEVAL-OET003V1

Evaluation board for automotive-grade ESD protection

主要特性

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

STEVAL-MKI109V3

Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

EVAL-L5963Q

L5963Q evaluation board

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

EVB-T3

TESEO III evaluation board

主要特性

  • ST Teseo III GNSS platform;
  • Multiconstellation GNSS: GPS, Galileo, Glonass, Beidou, QZSS are supported;
  • USB Power Supply and battery charge;
  • Internal battery for standalone usage;
  • ON/OFF and Reset buttons available;
  • NMEA over:
    • Bluetooth;
    • UART by USB;
    • USB;
  • μSD/MMC card reader for easy logging;
  • ST 3 axis gyroscope, ST 3 axis accelerometer and ST pressure sensor to enable ST Teseo DRAW1;
  • PPS output;
  • Leds:
    • PPS
    • Fix status
    • Antenna sensing
    • Power

Show More

STEVAL-IDB007V2

STEVAL-IDB007V2 evaluation platform based on the BlueNRG-1

主要特性

  • Bluetooth® SMART board based on the BlueNRG-1 Bluetooth low energy system on chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® low energy compliant, supports master, slave and simultaneous master-and-slave roles
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

STEVAL-MKI109V2

eMotion: ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F103RET6 high-performance ARM Cortex -M3 microcontroller
  • Includes a DIL24 socket for easy MEMS adapter connection
  • 3 V on-board linear voltage regulator
  • DFU compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Debugging connector for SWD/JTAG
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • Description 版本 文档大小 操作
      AN5092
      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications
      2.0
      521.09 KB
      PDF
      AN4872
      BlueNRG-1 and BlueNRG-2 UART bootloader protocol
      3.0
      4.7 MB
      PDF
      AN4434
      CMOS F8H automotive EEPROM cycling endurance and data retention
      4.0
      367.97 KB
      PDF
      AN2440
      Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines
      5.0
      356.4 KB
      PDF
      AN4218
      Hardware design guideline power supply and voltage measurement
      3.0
      1.4 MB
      PDF
      AN2689
      Protection of automotive electronics from electrical hazards, guidelines for design and component selection
      3.1
      797.51 KB
      PDF
      AN4869
      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade
      5.0
      1.02 MB
      PDF
      AN4392
      Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 – 2483.5 MHz band
      3.2
      539.68 KB
      PDF
      AN1471
      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?
      4.4
      72.36 KB
      PDF
      AN5092

      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications

      AN4872

      BlueNRG-1 and BlueNRG-2 UART bootloader protocol

      AN4434

      CMOS F8H automotive EEPROM cycling endurance and data retention

      AN2440

      Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines

      AN4218

      Hardware design guideline power supply and voltage measurement

      AN2689

      Protection of automotive electronics from electrical hazards, guidelines for design and component selection

      AN4869

      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade

      AN4392

      Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 – 2483.5 MHz band

      AN1471

      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?

    • Description 版本 文档大小 操作
      TN1189
      A3G4250D: supplementary data related to the 3-axis digital output gyroscope
      1.0
      160.14 KB
      PDF
      TN0897
      ST SPI protocol
      2.2
      420.96 KB
      PDF
      TN0018
      LGA 封装中MEMS 传感器的表面贴装指南
      1.0
      251.2 KB
      PDF
      TN1189

      A3G4250D: supplementary data related to the 3-axis digital output gyroscope

      TN0897

      ST SPI protocol

      TN0018

      LGA 封装中MEMS 传感器的表面贴装指南

    • Description 版本 文档大小 操作
      DT0063
      Bluetooth low-energy network: time-stamping and sample-rate-conversion
      2.0
      281.1 KB
      PDF
      DT0068
      How to replace a low-speed wired connection using a BLE link
      3.0
      291.25 KB
      PDF
      DT0063

      Bluetooth low-energy network: time-stamping and sample-rate-conversion

      DT0068

      How to replace a low-speed wired connection using a BLE link

演示和培训资料

    • Description 版本 文档大小 操作
      Automotive Security implementation for Secure Driving 1.0
      1.52 MB
      PDF
      EEPROM Advanced Automotive products 1.0
      671.53 KB
      PDF

      Automotive Security implementation for Secure Driving

      EEPROM Advanced Automotive products

出版刊物和宣传资料

    • Description 版本 文档大小 操作
      A698x family High-performance automotive synchronous DC-DC converters 1.0
      1.13 MB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.0
      718.85 KB
      PDF
      Automotive multichannel power management ICs 1.0
      698.09 KB
      PDF
      MEMS automotive sensors - Making our cars safer and more comfortable 1.0
      773.66 KB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      SOD128Flat Automotive-grade rectifiers 1.0
      1.42 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      TESEO-DRAW Dead Reckoning Automotive Way 1.0
      2.3 MB
      PDF
      TESEOIII: GPS/Galileo/Glonass/BeiDou/QZSS standalone receiver 1.0
      754.65 KB
      PDF

      A698x family High-performance automotive synchronous DC-DC converters

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      Automotive multichannel power management ICs

      MEMS automotive sensors - Making our cars safer and more comfortable

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      SOD128Flat Automotive-grade rectifiers

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      TESEO-DRAW Dead Reckoning Automotive Way

      TESEOIII: GPS/Galileo/Glonass/BeiDou/QZSS standalone receiver

    • Description 版本 文档大小 操作
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF
      EEPROM Advanced Automotive selection guide 1.0
      709.5 KB
      PDF
      Power amplifiers and voltage regulators
      750.29 KB
      PDF
      Smart power solutions for car body applications 4.0
      3.38 MB
      PDF

      Automotive-grade protection devices and rectifiers

      EEPROM Advanced Automotive selection guide

      Power amplifiers and voltage regulators

      Smart power solutions for car body applications

    • Description 版本 文档大小 操作
      Driving smart power in automotive 1.0
      1.24 MB
      PDF

      Driving smart power in automotive

设计工具

    • 产品型号

      Smart Selector for Micro 32bit Power Architecture products

开发工具硬件

    • 产品型号

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

软件

    • 产品型号

      Dead Reckoning Automotive Way - Sensor fusion firmware for Teseo Family (STA80)

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

    • 产品型号

      Android sensor HAL for MEMS motion and environmental sensors (Input framework)

      Standard C platform-independent drivers for MEMS motion and environmental sensors

      Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)

      Linux device drivers for MEMS motion and environmental sensors (Input framework)

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

二极管(功率肖特基和场效应整流)产品选择器

TVS产品选择器

Automotive Analog and Power

产品型号 Description
L5300AH7 5V Low drop voltage regulator
L5300EPT 5 V low dropout voltage regulator
L5300GJ Standard Functions, Voltage Regulators
L5300RPT 5 V low dropout voltage regulator
L5963 Dual monolithic switching regulator with LDO and HSD
L9777 Low power voltage regulator
产品型号
5V Low drop voltage regulator
5 V low dropout voltage regulator
Standard Functions, Voltage Regulators
5 V low dropout voltage regulator
Dual monolithic switching regulator with LDO and HSD
Low power voltage regulator

Automotive Infotainment and Telematics

产品型号 Description
FDA803D 1 x 45 W class D digital input automotive power amplifier with diagnostics, wide voltage operation range for car audio and telematics
STA8090GA Automotive Grade GPS/Galileo/Glonass/Beidou/QZSS receiver
TDA7577BLV Low voltage operation, high efficiency (class SB), intelligent, dual BTL output power amplifier with full I2C diagnostics including tweeter detection and hardware stand-by/mute
产品型号
1 x 45 W class D digital input automotive power amplifier with diagnostics, wide voltage operation range for car audio and telematics
Automotive Grade GPS/Galileo/Glonass/Beidou/QZSS receiver
Low voltage operation, high efficiency (class SB), intelligent, dual BTL output power amplifier with full I2C diagnostics including tweeter detection and hardware stand-by/mute

Automotive Microcontrollers

产品型号 Description
SPC58EC80C3 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
产品型号
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

EMI Filtering and Signal Conditioning

产品型号 Description
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
产品型号
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter

MEMS and Sensors

产品型号 Description
A3G4250D 3-axis digital gyroscope for automotive telematics, navigation applications, AEC-Q100 qualified
AIS3624DQ 3-axis accelerometer for non-safety automotive applications, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
ASM330LHH Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope
产品型号
3-axis digital gyroscope for automotive telematics, navigation applications, AEC-Q100 qualified
3-axis accelerometer for non-safety automotive applications, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope

电源管理

产品型号 Description
A6985F 38 V 0.5 A synchronous step-down switching regulator with 30 uA quiescent current
A6986 38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
A6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
产品型号
38 V 0.5 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current

Protection Devices

产品型号 Description
ESDA14V2SC5Y Automotive quad-line TVS for ESD protection
ESDAXLC6-1BT2Y Automotive single-line bidirectional ESD protection for high speed interface
产品型号
Automotive quad-line TVS for ESD protection
Automotive single-line bidirectional ESD protection for high speed interface

Secure MCUs

产品型号 Description
ST33G1M0A 32bit ARM® SecurCore® SC300 optimized for M2M for car
ST33J2M0 32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors
产品型号
32bit ARM® SecurCore® SC300 optimized for M2M for car
32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors

无线收发器、MCU、模块

产品型号 Description
BlueNRG-1 Bluetooth Low Energy System On Chip
产品型号
Bluetooth Low Energy System On Chip