概观
工具与软件
资源
解决方案
质量与可靠性
Sales Briefcase
eDesignSuite
开始
样片和购买
Partner products
  • L9177 is a device realized in ST BCD proprietary technology, able to provide the full set of power supplies and signal preprocessing peripherals needed to control a 2 Cylinder internal combustion Engine for Low End Application (e.g. small motorcycle, K-car, nautical engines, etc.).

    L9177 integrates a 5 V main voltage regulator, a 5 V 40 mA tracking regulator for sensor supply and a 2.5 mA 5 V standby regulator.
    The two channels injector drivers, the O2 sensor heater and two relay drivers can be controlled both with parallel input and with SPI interface. One additional relay driver and the lamp driver are controlled by SPI. The stepper motor driver is designed for a double winding coil motor, used for engine idle speed control.
    Low side drivers implement SR control to minimize emission.
    A protected 50 mA high side driver is provided.
    A Variable Reluctance Sensor interface allows the connection to a commercial magnetic pick-up, allowing the indirect measurement of internal combustion engine crank angle. A K-line (standard ISO-9141 compatible) is provided as data communication interface.
    All functionalities are fully protected and provide complete diagnostics via a 24bit SPI interface. An overall protection against over temperature is provided as well.
    The device is available in PowerSO46, ST proprietary package for high power application.

    主要特性

    • Supply voltage from 6 V to 18 V
      • Basic functionality guaranteed down to 3.9 V
    • 5 V regulator up to 300 mA with thermal shutdown protection in current limitation condition
    • 5 V tracking regulator up to 40 mA and short to battery protection
    • 5 V standby regulator up to 2.5 mA
    • 2 channels injectors drivers
      • Parallel and serial driving
      • Output internally clamped to 60 V
      • Minimum overcurrent at 2.8 A
      • Ron 0.6 Ω worst case (at Tj= 150 °C)
    • 3 relay drivers
      • 2 with parallel and serial driving, 1 with serial driving
      • Output internally clamped to 45 V
      • Minimum guaranteed output current 1 A
      • Ron 1.5 Ω worst case (at Tj= 150 °C)
    • Tachometer driver
      • Parallel and serial driving
      • Minimum guaranteed output current 25 mA
      • Ron 5 Ω worst case (at Tj= 150 °C)
    • Lamp driver
      • Serial driving
      • Output internally clamped to 45 V
      • Minimum guaranteed output current 1 A (2 A during in-rush)
      • Ron 1.5 Ω worst case (at Tj= 150 °C)
    • Stepper motor driver
      • Parallel driving
      • Minimum guaranteed output current 500 mA - full step
      • Ron 2.6 Ω worst case on the diagonal (at Tj= 150 °C)
    • O2 sensor heater
      • Parallel and serial driving
      • Output internally clamped to 45 V
      • Minimum guaranteed output current 3 A
      • Ron 0.5 Ω worst case (at Tj= 150 °C)
    • Protected high side driver
      • 100 mA min. current limitation threshold
    • Full diagnosis by SPI
      • Injector driver: OL, STG, OC
      • Relay and Lamp drivers: OL, STG, OC
      • O2 sensor heater: OL, STG, OC
      • Tachometer: OL, STG, OC
      • Stepper motor driver: OL, STG, STB, OC
      • general diagnostic: over-temperature
    • Protection for STB, STG (for stepper motor drivers and tracking regulator)
    • Self configuring variable reluctance sensor interface
    • K-line transceiver
    • Microcontroller reset logic
    • Packaged in PowerSO46

样片和购买

型号
Package
Packing Type
Temperature (°C) Marketing Status
Budgetary Price (US$)*
Quantity
ECCN (US)
More info
Order from Distributors
Order from ST
min
max
L9177TR PowerSO 46 Tape And Reel -40 150
Active
5.6 1000 EAR99
MORE INFO

Country of Origin:

MALAYSIA

No availability of distributors reported, please contact our sales office
L9177 PowerSO 46 Tube -40 150
Active
5.6 1000 EAR99
MORE INFO

Country of Origin:

MALAYSIA

No availability of distributors reported, please contact our sales office

L9177TR

Package

PowerSO 46

Packing Type

Tape And Reel

Unit Price (US$)

5.6*

Operating Temperature (°C)

(min)

-40

(max)

150

Marketing Status

Active

Unit Price (US$)

5.6

Quantity

1000

ECCN (US)

EAR99

Country of Origin

MALAYSIA

L9177

Package

PowerSO 46

Packing Type

Tube

Unit Price (US$)

5.6*

Operating Temperature (°C)

(min)

-40

(max)

150

Marketing Status

Active

Unit Price (US$)

5.6

Quantity

1000

ECCN (US)

EAR99

Country of Origin

MALAYSIA

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

Recommended for you

00 Files selected for download

技术文档

    • Description 版本 文档大小 Action
      DS6864
      Peripheral on chip for low end engine control
      1.0
      967.48 KB
      PDF
      DS6864

      Peripheral on chip for low end engine control

出版刊物和宣传资料

    • Description 版本 文档大小 Action
      STMicroelectronics enables electronic control of the next generation of Gasoline Direct Injection (GDI) engines. 1.0
      822.68 KB
      PDF

      STMicroelectronics enables electronic control of the next generation of Gasoline Direct Injection (GDI) engines.

型号 Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
L9177
Active
PowerSO 46 汽车 Ecopack2
L9177TR
Active
PowerSO 46 汽车 Ecopack2

L9177

Package:

PowerSO 46

Material Declaration**:

PDF

Marketing Status

Active

Package

PowerSO 46

Grade

Automotive

RoHS Compliance Grade

Ecopack2

L9177TR

Package:

PowerSO 46

Material Declaration**:

PDF

Marketing Status

Active

Package

PowerSO 46

Grade

Automotive

RoHS Compliance Grade

Ecopack2

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.