STM32F469AI high perfromance MCU
The STM32F4 series Cortex-M-based microcontroller, with FPU, high performance NVM and accelerator technology is chosen for its digital signal processing capabilities and high clock speeds to manage the very high data rates arriving from the vibration and environmental sensors.
IIS3DWB digital vibration sensor
This 3-axis digital vibration sensor is particularly suitable for vibration monitoring in industrial applications due to its very wide bandwidth, with low noise and highly stable output, and repeatable sensitivity, as well its extended temperature range.
IMP34DT05 digital microphone
This is a highly compact, low-power, omnidirectional, low-distortion digital microphone, featuring 64 dB signal-to-noise ratio and 6 dBFS ±3 dB sensitivity in an EMI-shielded package guaranteed to operate over an extended temperature range.
LPS22HB and HTS221 environmental sensors
The LPSSHB digital pressure and HTS221 relative humidity and temperature sensors complete the data requirements for a comprehensive condition monitoring scenario
L6362A IO-Link transceiver
IO-Link PHY Device transceiver ensures bi-direction half duplex IO-Link communication in all possible communication modes granted by the standard (COM1, COM2 and COM3).
- Full suite of smart, low power industrial grade sensors, the solution works with a dedicated FW dedicated to high end digital signal processing like FFT and it features:
- Dedicated components for industrial use cases and digital signal processing:
- Two sensors covering extremely wide vibration frequency spectrum with very high sampling rates
- Two environmental sensors providing accurate real time humidity, pressure and temperature data.
- High performance microcontroller with digital signal processing capabilities able to transform raw data into analytical data on the fly
- Digital signal processing algorithms like:
- advanced frequency domain signal processing with programmable FFT size, overlapping and averaging, windowing
- advanced time domain signal processing for speed RMS, acceleration max peak computation
- IO-Link standard device compliance ensures manufacturer and fieldbus independence allowing immediate compatibility with any PLC or IO-Link Master hub.
|DIGIKEY||WORLDWIDE||99||1||Buy from Distributor|
|RS COMPONENTS||EUROPE||20||1||Buy from Distributor|
|MOUSER||WORLDWIDE||31||1||Buy from Distributor|
|Farnell Element14||EUROPE||26||1||Buy from Distributor|
The STEVAL-BFA001V2B is an industrial reference design kit designed for condition monitoring (CM) and predictive maintenance (PdM). The layout is designed to meet IEC61000-4-2/4 and EN60947 requirements for industrial applications.
The hardware development kit consists of an industrial sensor board (STEVAL-IDP005V2; not available for separate sale), specifically designed with dimensions (50mm x 9mm x 9mm) that reflect real industrial applications and needs, an STLINK-V3MINI programming and debugging tool, an adapter (STEVAL-UKI001V2; not available for separate sale), a 0.050” 10-pin flat cable, a 4-pole cable mount connector plug with male contacts and an M12 female connector with a 2 m cable which is used for power on and connection with a master port. The connection is managed using a standard multipolar cable with one wire used for IO-Link data, one for the L+ line (positive supply voltage pole) and one for the L- line (negative supply voltage pole).
The STSW-BFA001V2 firmware package (freely downloadable below) includes dedicated algorithms for advanced time and frequency domain signal processing and analysis of the high bandwidth 3D digital accelerometer for vibration monitoring. The package includes pressure, relative humidity and temperature sensor monitoring samples as well as audio algorithms for acoustic emission (AE).
The firmware runs on the high performance STM32F469AI, ARM® Cortex®-M4, 32-bit microcontroller. The sensor data analysis results can be displayed on a user PC terminal emulator via wired connectivity (by connecting the STEVAL-IDP005V2 UART to a USB PC port through the STEVAL-UKI001V2 adapter and STLINK-V3MINI Virtual COM) or the related IO-Link master board interface (connecting the STEVAL-IDP005V2 to an IO-Link master board through the M12 cable).
IO-Link device stack v1.1. (for evaluation purposes with some limitations) is included in object library format with IO-Link Device Descriptor (IODD) for all measurements and with dedicated examples to demonstrate device interoperability with any master tool. It supports BLOB transfer for vibration and acoustic FFT data, event generator and parameter configuration.
The package also includes a GUI to demonstrate the IO-Link device features when connected to the STEVAL-IDP004V2 multi-port master evaluation board (not included in the kit).
All Evaluation Features
- Optimized form factor
- 50mm x 9mm x 9mm
- Industrial environment friendly:
- Designed to meet IEC61000-4-2/4 and EN60947 requirements
- Designed to meet IEC industrial standard requirements
- Main supply voltage: 18 V - 32 V
- IO-Link communication:
- PHY transceiver using the L6362A Device transceiver for data communication with host unit
- IO-Link stack v.1.1 and IODD file
- M12 industrial connector
- Programmability and debugging options:
- SWD connector for debugging and programming capability
- Reset button
- Expansion connector with GPIO, ADC, I2C bus
- Optimized form factor
MEMS and Sensors
STMicroelectronics - SL-BFA001V2B
All tools & software
产品型号 状态 描述 类型 供应商 Worldwide worldwide Asia region Europe region Africa region North America region South America region Oceania region Afghanistan country Bahrain country Bangladesh country Bhutan country Brunei country Burma (Myanmar) country Cambodia country China country East Timor country India country Indonesia country Iraq country Japan country Jordan country Kazakhstan country Kuwait country Kyrgyzstan country Laos country Malaysia country Maldives country Mongolia country Nepal country Oman country Pakistan country Philippines country Qatar country Russian Federation country Saudi Arabia country Singapore country South Korea country Sri Lanka country Taiwan country Tajikistan country Thailand country Turkmenistan country United Arab Emirates country Uzbekistan country Vietnam country Yemen country Albania country Andorra country Armenia country Austria country Azerbaijan country Belarus country Belgium country Bosnia and Herzegovina country Bulgaria country Croatia country Cyprus country Czech Republic country Denmark country Estonia country Finland country France country Georgia country Germany country Greece country Hungary country Iceland country Ireland country Israel country Italy country Latvia country Liechtenstein country Lithuania country Luxembourg country Macedonia country Malta country Moldova country Monaco country Montenegro country Netherlands country Norway country Poland country Portugal country Romania country San Marino country Serbia country Slovakia country Slovenia country Spain country Sweden country Switzerland country Turkey country Ukraine country United Kingdom country Vatican City country Algeria country Angola country Benin country Botswana country Burkina country Burundi country Cameroon country Cape Verde country Central African Republic country Chad country Comoros country Democratic Republic of Congo country Djibouti country Egypt country Equatorial Guinea country Eritrea country Ethiopia country Gabon country Gambia country Ghana country Guinea country Guinea-Bissau country Ivory Coast country Kenya country Lesotho country Liberia country Libya country Madagascar country Malawi country Mali country Mauritania country Mauritius country Morocco country Mozambique country Namibia country Niger country Nigeria country Rwanda country Sao Tome and Principe country Senegal country Seychelles country Sierra Leone country Somalia country South Africa country Swaziland country Tanzania country Togo country Tunisia country Uganda country Zambia country Zimbabwe country Antigua and Barbuda country Bahamas country Barbados country Belize country Canada country Costa Rica country Dominica country Dominican Republic country El Salvador country Grenada country Guatemala country Haiti country Honduras country Jamaica country Mexico country Nicaragua country Panama country Saint Kitts and Nevis country Saint Lucia country Saint Vincent and the Grenadines country Trinidad and Tobago country United States country Argentina country Bolivia country Brazil country Chile country Colombia country Ecuador country Guyana country Paraguay country Peru country Suriname country Uruguay country Venezuela country Australia country Fiji country Kiribati country Marshall Islands country Micronesia country Nauru country New Zealand country Palau country Papua New Guinea country Samoa country Solomon Islands country Tonga country Tuvalu country Vanuatu country批量生产
Software package for STEVAL- BFA001V2B multi-sensor development kit for condition monitoring and predictive maintenance
描述:Software package for STEVAL- BFA001V2B multi-sensor development kit for condition monitoring and predictive maintenance